{"title":"Heater","description":null,"products":[{"product_id":"f273699-propane-fuel-filter","title":"F273699 Propane Fuel Filter for Mr Heater, Buddy Heater, Big Buddy, Tough Buddy Heaters \u0026 Portable Buddy","description":"\u003ch2\u003eF273699 Propane Fuel Filter\u003c\/h2\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemoves contaminants from propane supplied by bulk cylinders.\u003c\/li\u003e\n\u003cli\u003eProtects heater from oily residue and particles in the fuel line.\u003c\/li\u003e\n\u003cli\u003eDesigned for use with a bulk cylinder and hose assembly.\u003c\/li\u003e\n\u003cli\u003eConstructed from cast aluminum.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReplaces \/ Cross-Reference Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eF273699\u003c\/li\u003e\n\u003cli\u003e273699\u003c\/li\u003e\n\u003cli\u003eF276163\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility \u0026amp; Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eHeater Models:\u003c\/b\u003e Mr. Heater Portable Buddy, Big Buddy, Tough Buddy\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHose Assemblies:\u003c\/b\u003e Recommended for use with F273701, F273702, F273703, F273718, F298802\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to Replace\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplace annually as part of routine maintenance.\u003c\/li\u003e\n\u003cli\u003eReplace immediately if the filter appears clogged or damaged.\u003c\/li\u003e\n\u003cli\u003eReplace if the heater exhibits inconsistent flame or signs of fuel starvation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure the propane cylinder valve is fully closed before installation.\u003c\/li\u003e\n\u003cli\u003eThe filter installs directly onto the heater's swivel regulator inlet.\u003c\/li\u003e\n\u003cli\u003eAttach the propane hose to the other end of the filter.\u003c\/li\u003e\n\u003cli\u003eCheck all connections for leaks with a soapy water solution before operating the heater.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BlueStarsParts","offers":[{"title":"Default Title","offer_id":45772997886141,"sku":"AZ00970604","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2576\/7548\/files\/AZ00970604_1.jpg?v=1760070124"},{"product_id":"12-ft-f273684-propane-hose-with-regulator","title":"F273684 12 FT Propane Hose with 2-Stage Regulator for Mr. Heater Big Buddy Vent-Free Heater, RV, Grill, Gas Stove, Fire Pit, Generator","description":"\u003ch2\u003eF273684 12 FT Propane Hose with Two-Stage Regulator\u003c\/h2\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHose Length: 12 feet\u003c\/li\u003e\n\u003cli\u003eHose Material: Reinforced rubber\u003c\/li\u003e\n\u003cli\u003eFittings Material: Solid brass\u003c\/li\u003e\n\u003cli\u003eRegulator: Two-stage design provides consistent gas pressure\u003c\/li\u003e\n\u003cli\u003eTank Connection: Hand-tightening wheel for tool-free installation on standard tanks\u003c\/li\u003e\n\u003cli\u003eIncluded Fittings: 3\/8 in. Male Pipe x 3\/8 in. Male Flare, 3\/8 in. Female Thread x 3\/8 in. Male Street Elbow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReplaces \/ Cross-Reference Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMr. Heater:\u003c\/strong\u003e F273684\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility \u0026amp; Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConnects appliances to 5 lb to 20 lb propane (LP) tanks\u003c\/li\u003e\n\u003cli\u003eFor use with Mr. Heater Vent-Free and Buddy heater models\u003c\/li\u003e\n\u003cli\u003eSuitable for various LP gas appliances including RVs, grills, gas stoves, and generators requiring a 3\/8 inch female flare connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to Replace\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVisible damage to the hose, such as cracks, abrasions, or brittleness\u003c\/li\u003e\n\u003cli\u003eLeaks detected at any connection point or along the hose\u003c\/li\u003e\n\u003cli\u003eRegulator fails to maintain consistent pressure or shows signs of physical damage\u003c\/li\u003e\n\u003cli\u003eAfter any fire, chemical exposure, or significant physical impact\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure both tank and appliance gas valves are fully closed before starting installation\u003c\/li\u003e\n\u003cli\u003eHand-tighten the connector to the propane tank; do not use tools or overtighten\u003c\/li\u003e\n\u003cli\u003ePerform a leak test on all connections using a soapy water solution before operating the appliance\u003c\/li\u003e\n\u003cli\u003eRoute the hose away from high-traffic areas, sharp edges, and hot surfaces\u003c\/li\u003e\n\u003cli\u003eConsult your appliance's owner's manual for specific installation requirements\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BlueStarsParts","offers":[{"title":"Default Title","offer_id":45772997918909,"sku":"AZ00182323","price":85.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2576\/7548\/files\/AZ00182323_1.jpg?v=1764141681"},{"product_id":"q3400a1024u-igniter-flame-rod-assembly-24v","title":"Q3400A1024\/U Igniter Flame Rod Assembly 24V","description":"\u003ch2\u003eQ3400A1024\/U Igniter Flame Rod\u003c\/h2\u003e\n\n\u003cp\u003eUpgrade your heating system with the Q3400A1024\/U Igniter Flame Rod, designed for optimal performance and reliability. This essential component is perfect for a variety of heating applications, ensuring safe and efficient operation.\u003c\/p\u003e\n\n\u003ch3\u003eIdeal Replacement\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\n        \u003cul\u003e\n            \u003cli\u003e1 x Flame Rod\u003c\/li\u003e\n            \u003cli\u003e1 x Mounting Clip\u003c\/li\u003e\n            \u003cli\u003e1 x Hardware\u003c\/li\u003e\n        \u003c\/ul\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\n        \u003cul\u003e\n            \u003cli\u003eLength: 31.2\"\u003c\/li\u003e\n            \u003cli\u003eVoltage: 24V AC\u003c\/li\u003e\n            \u003cli\u003eGas Type: NG\/LP\u003c\/li\u003e\n        \u003c\/ul\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCompatible with Honeywell Models:\u003c\/strong\u003e\n        \u003cul\u003e\n            \u003cli\u003eSV9401, SV9402, SV9403, SV9500, SV9500M2603, SV9500M2674, SV9500M2682\u003c\/li\u003e\n            \u003cli\u003eSV9501, SV9501M2528, SV9502, SV9503, SV9600, SV9600H, SV9601, SV9602\u003c\/li\u003e\n            \u003cli\u003eAFN643, L43-724, 68012, IG9500, MM643KX\u003c\/li\u003e\n        \u003c\/ul\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eReplaces Part Numbers:\u003c\/strong\u003e\n        \u003cul\u003e\n            \u003cli\u003eQ3400A1040, Q3400A1016, Q3400A1008, Q3400A1024, Q3400A1032, Q3400A1027\u003c\/li\u003e\n            \u003cli\u003eQ3450A1098, Q3450B2003, Q3450C1805, Q3450C2407, Q3450C3009, Q3450D1001\u003c\/li\u003e\n            \u003cli\u003eQ3450D2504, Q3450D2702, Q3450E3004, Q3480B1009, Q3480B1017, 42490L095\u003c\/li\u003e\n            \u003cli\u003eQ3450, Q3620, Q3480, GPQ3400A, 1024, 342640-001, PIT0207, PIT00207\u003c\/li\u003e\n            \u003cli\u003e42640001, 426401, 4103200, 1009524, 1146856, 1149856, 3UC35, B1401011, B14010-11\u003c\/li\u003e\n        \u003c\/ul\u003e\n    \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePrecision Ign\u003c\/h3\u003e","brand":"BlueStarsParts","offers":[{"title":"Default Title","offer_id":45844236730557,"sku":"AZ00150522","price":44.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2576\/7548\/files\/AZ00150522_1_e3a1cd4d-ae93-4b3d-9a41-2e5659b73366.jpg?v=1762245704"},{"product_id":"622286893-furnace-ignitor-hot-surface-igniter","title":"62-22868-93 Furnace Ignitor Hot Surface Igniter","description":"\u003ch2\u003e62-22868-93 Furnace Ignitor Hot Surface Igniter\u003c\/h2\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement hot surface ignitor\u003c\/li\u003e\n\u003cli\u003eConstructed from high-temperature silicon carbide\u003c\/li\u003e\n\u003cli\u003eVoltage: 120V\u003c\/li\u003e\n\u003cli\u003eWire Lead Length: 5.25 inches\u003c\/li\u003e\n\u003cli\u003eHeat-up Time: Approximately 34 seconds\u003c\/li\u003e\n\u003cli\u003eIncludes two high-temperature ceramic wire nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReplaces \/ Cross-Reference Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e62-22868-93\u003c\/li\u003e\n\u003cli\u003e62-22868-02\u003c\/li\u003e\n\u003cli\u003e62-22868-931PK\u003c\/li\u003e\n\u003cli\u003e62-22868-93-1PK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility \u0026amp; Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered for use in most Rheem, Ruud, and Weatherking gas furnaces.\u003c\/li\u003e\n\u003cli\u003eDirect fit for models requiring part number 62-22868-93, including the Rheem Criterion furnace series.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to Replace\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFurnace blower runs but burners fail to light.\u003c\/li\u003e\n\u003cli\u003eVisible crack, break, or burn spot on the ignitor element.\u003c\/li\u003e\n\u003cli\u003eIgnitor does not glow at the start of the heating cycle.\u003c\/li\u003e\n\u003cli\u003eIntermittent heating or frequent system lockouts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDisconnect electrical power and shut off the gas supply to the furnace before servicing.\u003c\/li\u003e\n\u003cli\u003eHandle the new ignitor by its ceramic base only. Do not touch the silicon carbide element, as skin oils can cause damage and premature failure.\u003c\/li\u003e\n\u003cli\u003eEnsure wire connections are secure using the supplied ceramic wire nuts.\u003c\/li\u003e\n\u003cli\u003eVerify the ignitor is properly aligned within the burner assembly after installation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BlueStarsParts","offers":[{"title":"Default Title","offer_id":45844236796093,"sku":"AZ00743408","price":23.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2576\/7548\/files\/AZ00743408_1_99197a3f-a8ac-458f-aab8-6bbaaec0a749.jpg?v=1762245702"},{"product_id":"lh33zs004-furnace-igniter-hot-surface-ignitor","title":"LH33ZS004 Furnace Igniter Hot Surface Ignitor","description":"\u003ch2\u003eLH33ZS004 Furnace Igniter Hot Surface Ignitor\u003c\/h2\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement hot surface igniter for gas furnaces.\u003c\/li\u003e\n\u003cli\u003eDurable construction for reliable ignition performance.\u003c\/li\u003e\n\u003cli\u003eDesigned as a wide-style igniter.\u003c\/li\u003e\n\u003cli\u003eCeramic block dimensions: 2 inches wide, 7\/8 inches deep.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReplaces \/ Cross-Reference Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLH33ZS004\u003c\/li\u003e\n\u003cli\u003eLH33ZS003\u003c\/li\u003e\n\u003cli\u003eLH33ZS002\u003c\/li\u003e\n\u003cli\u003eLH33ZS001\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility \u0026amp; Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits various furnace models from brands including Carrier, Bryant, and Payne.\u003c\/li\u003e\n\u003cli\u003eAlso compatible with select Day \u0026amp; Night and GE furnaces.\u003c\/li\u003e\n\u003cli\u003eIntended for systems requiring a wide-style igniter configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to Replace\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFurnace blower runs, but burners fail to ignite.\u003c\/li\u003e\n\u003cli\u003eNo heat is produced during a heating cycle.\u003c\/li\u003e\n\u003cli\u003eVisible crack, burn spot, or physical damage on the existing igniter element.\u003c\/li\u003e\n\u003cli\u003eThe igniter fails to glow red hot during the ignition sequence.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAlways disconnect all electrical power to the furnace before servicing.\u003c\/li\u003e\n\u003cli\u003eHandle the new igniter by its ceramic base only. Oils from skin can damage the ignition element.\u003c\/li\u003e\n\u003cli\u003eEnsure the wire harness is securely connected after installation.\u003c\/li\u003e\n\u003cli\u003eVisually inspect the part for damage before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"BlueStarsParts","offers":[{"title":"Default Title","offer_id":45844236828861,"sku":"AZ00146470","price":22.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2576\/7548\/files\/AZ00146470_1_8ef1bea4-8402-4fee-8b9f-1f485d6ba25e.jpg?v=1765275952"},{"product_id":"632625-furnace-ignitor","title":"632625 Furnace Ignitor - For Nordyne Intertherm Broan Miller Furnaces","description":"\u003ch2\u003e632625 Hot Surface Furnace Ignitor\u003c\/h2\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement hot surface ignitor designed to safely and consistently ignite the gas burner assembly in residential heating systems.\u003c\/li\u003e\n\u003cli\u003eConstructed from high-density, temperature-resistant materials to withstand rapid heating cycles and prevent thermal shock cracking.\u003c\/li\u003e\n\u003cli\u003eIncludes a factory-crimped, high-temperature ceramic wire harness and plug block for a secure, plug-and-play electrical connection.\u003c\/li\u003e\n\u003cli\u003eEngineered to exact original equipment resistance specifications for optimal heat-up timing and immediate gas ignition.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReplaces \/ Cross-Reference Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e632625\u003c\/li\u003e\n\u003cli\u003e632625R\u003c\/li\u003e\n\u003cli\u003e1016290S\u003c\/li\u003e\n\u003cli\u003eN1016290S\u003c\/li\u003e\n\u003cli\u003eCMF95 M7RL\u003c\/li\u003e\n\u003cli\u003eCMF95\/M7\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility \u0026amp; Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with select residential and mobile home gas furnaces.\u003c\/li\u003e\n\u003cli\u003eFits specific furnace units manufactured by Nordyne, Intertherm, Broan, and Miller.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to Replace\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe furnace draft inducer motor runs and the gas valve opens, but the burners fail to light, causing the system to lock out.\u003c\/li\u003e\n\u003cli\u003eThe ignitor heating element displays visible hairline cracks, structural breakage, or heavy white oxidation spots.\u003c\/li\u003e\n\u003cli\u003eThe furnace diagnostic control board continuously flashes an error code indicating an ignition failure.\u003c\/li\u003e\n\u003cli\u003eTesting the ignitor wire leads with a digital multimeter displays infinite resistance (an open circuit).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTurn off the main electrical breaker to the furnace and shut off the incoming gas supply valve prior to servicing the unit.\u003c\/li\u003e\n\u003cli\u003eNever touch the dark heating element of the new ignitor with your bare hands; skin oils will create hot spots and cause the part to shatter when energized.\u003c\/li\u003e\n\u003cli\u003eCarefully insert the new ignitor through the burner box mounting bracket, as the element is extremely brittle and will snap if bumped against the metal housing.\u003c\/li\u003e\n\u003cli\u003eRoute the wire harness exactly as it was originally placed, ensuring it is secured well away from the open burner flames and sharp sheet metal edges.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BlueStarsParts","offers":[{"title":"Default Title","offer_id":45844236861629,"sku":"AZ00152656","price":45.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2576\/7548\/files\/AZ00152656_1_45ea28e2-0b9b-436e-b781-1f3e5f97b7f5.jpg?v=1762245700"},{"product_id":"3-feet-propane-refill-adapter-hose-with-gauge-onoff-control-valve-stainless-steel","title":"3FT Propane Refill Adapter Hose with Gauge \u0026 ON\/OFF Control Valve - Extension Propane Refill Hose Fill 1 Pound Bottles from 5-40lb Tank","description":"\u003ch2\u003e3FT Propane Refill Adapter Hose with Gauge \u0026amp; ON\/OFF Control Valve\u003c\/h2\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHose Length: 3 feet (36 inches)\u003c\/li\u003e\n\u003cli\u003eHose Material: Braided stainless steel\u003c\/li\u003e\n\u003cli\u003ePressure Rating: 350 PSI\u003c\/li\u003e\n\u003cli\u003eValve: Manual ON\/OFF control valve for flow regulation\u003c\/li\u003e\n\u003cli\u003eGauge: Integrated pressure gauge with a color-coded, luminous dial\u003c\/li\u003e\n\u003cli\u003eCertification: CSA Certified\u003c\/li\u003e\n\u003cli\u003eIncludes: Thread protector cap, thread seal tape\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReplaces \/ Cross-Reference Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal aftermarket component designed to refill 1 lb propane cylinders\u003c\/li\u003e\n\u003cli\u003eReplaces similar adapter hoses with QCC1\/Type 1 and 1\"-20 throwaway cylinder thread fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility \u0026amp; Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTank Connection: QCC1 \/ Type 1 connector fits standard 5 lb to 40 lb propane tanks\u003c\/li\u003e\n\u003cli\u003eCylinder Connection: 1 inch x 20 female throwaway cylinder thread fits standard 1 lb propane bottles\u003c\/li\u003e\n\u003cli\u003eUse: Transfers liquid propane from a large tank to a small 1 lb cylinder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to Replace\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVisible signs of wear, including cracks, abrasions, or fraying on the hose\u003c\/li\u003e\n\u003cli\u003eGas leaks detected at fittings, the valve, or along the hose body\u003c\/li\u003e\n\u003cli\u003eThe control valve becomes difficult to operate or fails to shut off completely\u003c\/li\u003e\n\u003cli\u003ePressure gauge is damaged or provides inaccurate readings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAlways conduct refilling in a well-ventilated outdoor area, away from flames or ignition sources.\u003c\/li\u003e\n\u003cli\u003eChill the empty 1 lb cylinder in a freezer for 15-20 minutes before filling to create a pressure differential.\u003c\/li\u003e\n\u003cli\u003eEnsure both the propane tank valve and the hose control valve are in the OFF position before connecting.\u003c\/li\u003e\n\u003cli\u003eConnect the QCC1 fitting to the large tank first, then attach the 1 lb cylinder.\u003c\/li\u003e\n\u003cli\u003eInvert the large source tank to ensure liquid propane is transferred.\u003c\/li\u003e\n\u003cli\u003eSlowly open the source tank valve, then the hose control valve to begin filling. Close all valves once transfer is complete.\u003c\/li\u003e\n\u003cli\u003eCheck all connections for leaks with a soapy water solution after filling.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BlueStarsParts","offers":[{"title":"Default Title","offer_id":45911441047741,"sku":"AZ00116807","price":48.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2576\/7548\/files\/AZ00116250_1.jpg?v=1764141823"},{"product_id":"heater-wick-aw4e-2pack-compatible-with-sengoku","title":"Heater Wick AW4E - For Sengoku HMN-110 KeroHeat CTN-110 Heatmate HMN-110 Mega Heat MGN-110 (#4308953) - Replacement American Wick #4E - 2 Pack","description":"\u003ch2\u003eAW4E \/ #4E Heater Replacement Wick - Pack of 2\u003c\/h2\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Temperature Fiberglass Top:\u003c\/strong\u003e The upper portion is constructed from premium heat-resistant fiberglass that won't burn away, ensuring a consistent flame height and maximum heat output during extended use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuperior Capillary Wicking:\u003c\/strong\u003e Features a high-absorbency cotton bottom that efficiently draws kerosene from the tank to the burner, preventing \"dry spots\" and ensuring a steady, reliable fuel supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-Stamped Metal Pins:\u003c\/strong\u003e Equipped with factory-aligned mounting pins that snap directly into the wick adjuster mechanism, allowing for a perfect \"level\" installation that prevents uneven burning or smoking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean-Burn Technology:\u003c\/strong\u003e Specifically woven to promote a clean, soot-free blue flame, significantly reducing the \"kerosene smell\" during startup and shutdown when used with high-quality 1-K fuel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced Stitching:\u003c\/strong\u003e The transition between the fiberglass top and cotton base is double-stitched to prevent fraying or separation, even after multiple \"dry burns\" to remove carbon buildup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReplaces \/ Cross-Reference Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Part Number:\u003c\/strong\u003e AW4E, AW-4E.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmerican Wick Standard:\u003c\/strong\u003e #4E, 4E.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Codes:\u003c\/strong\u003e 4308953, 04308953, 2125034600.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry Standards:\u003c\/strong\u003e Kero-World 32225, Pick-A-Wick PW-72, GHP KFA-110.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther Codes:\u003c\/strong\u003e B00MOCKKPE, PD00001241, AH-AW4E, EA-AW4E.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eThis wick is specifically designed for 10,000 to 11,000 BTU portable radiant and convection heaters. Key compatible models include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSengoku:\u003c\/strong\u003e Fits the \u003cstrong\u003eHMN-110\u003c\/strong\u003e (Heatmate) and \u003cstrong\u003eOR-77\u003c\/strong\u003e models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeroHeat:\u003c\/strong\u003e Compatible with \u003cstrong\u003eCTN-110\u003c\/strong\u003e and \u003cstrong\u003eCV-110\u003c\/strong\u003e portable units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMega Heat:\u003c\/strong\u003e Direct fit for the \u003cstrong\u003eMGN-110\u003c\/strong\u003e series.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComfort Glow:\u003c\/strong\u003e Fits various radiant models including the \u003cstrong\u003eGRW-6\u003c\/strong\u003e and \u003cstrong\u003eGRW-10\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e This is a \"Pinned\" wick. If your heater's wick adjuster does not have slots for metal pins, this model will not fit. Always verify the BTU rating of your heater before purchasing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to Replace\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKnob is Hard to Turn:\u003c\/strong\u003e If the wick adjuster knob feels \"sticky\" or requires force to raise, the wick is likely saturated with tar and carbon deposits that are jamming the mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong Fuel Odor:\u003c\/strong\u003e A persistent smell of unburned kerosene while the heater is running usually indicates the fiberglass top is fouled and cannot maintain a clean combustion temperature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlame Won't Reach Full Height:\u003c\/strong\u003e Even with a full tank, the flame remains low or uneven, suggesting the cotton bottom is clogged with water or impurities from old fuel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisible \"Carbon Crusting\":\u003c\/strong\u003e The top of the wick looks like black, hard charcoal. While a \"dry burn\" can fix this temporarily, once the fiberglass becomes brittle, it’s time for a new one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd-of-Season Maintenance:\u003c\/strong\u003e For the best performance and safety, it is highly recommended to start every winter season with a fresh, clean wick.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First:\u003c\/strong\u003e \u003cstrong\u003eCRITICAL:\u003c\/strong\u003e Ensure the heater is completely cool and the fuel tank is empty before disassembly. Work in a well-ventilated area to avoid inhaling fumes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe 60-Minute Soak:\u003c\/strong\u003e \u003cstrong\u003ePRO TIP:\u003c\/strong\u003e After installing the new wick and filling the tank, you MUST wait at least \u003cstrong\u003e60 minutes\u003c\/strong\u003e before lighting it. Lighting a \"dry\" wick will permanently ruin the fiberglass top in seconds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin Alignment:\u003c\/strong\u003e When installing, ensure all three pins are fully seated in the adjuster sleeve. If one pin is loose, the wick will sit crooked, causing a lopsided flame and excessive soot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFresh Fuel Only:\u003c\/strong\u003e Only use clear 1-K grade kerosene. If your fuel has a yellow tint or contains water, your new wick will \"tar up\" and fail within days.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Burn Weekly:\u003c\/strong\u003e To extend the life of your new AW4E wick, perform a \"dry burn\" once a week by letting the heater run out of fuel naturally. This burns off the tar and keeps the fiberglass soft.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BlueStarsParts","offers":[{"title":"Default Title","offer_id":46041559335101,"sku":"AZ00192500","price":22.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2576\/7548\/files\/AZ00192500_1_6381977e-ab88-4206-82fe-90bf93ec8c25.jpg?v=1765275932"},{"product_id":"igniter-320677200-16-fins-incoloy-800-stainless","title":"Igniter 3-20-677200 16 Fins Incoloy 800 Stainless","description":"\u003ch2\u003eIgniter 3-20-677200 16 Fins Incoloy 800 Stainless\u003c\/h2\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Incoloy 800 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eElectrical Rating: 120V AC, 306W - 310W\u003c\/li\u003e\n\u003cli\u003eDesign: 16-fin element\u003c\/li\u003e\n\u003cli\u003eConnection: Male spade connectors\u003c\/li\u003e\n\u003cli\u003eDimensions: 11-inch wire length, 3.1-inch cartridge length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReplaces \/ Cross-Reference Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3-20-677200\u003c\/li\u003e\n\u003cli\u003eXP3520\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility \u0026amp; Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits select pellet and coal stove models from brands including Harman, Heatilator, and Eco-Choice.\u003c\/li\u003e\n\u003cli\u003eKnown Model Fitment: Eco-Choice BA100, Eco-Choice BH105\u003c\/li\u003e\n\u003cli\u003eNote: Verify specifications and fin count of your original part before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to Replace\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStove fails to ignite pellets during the startup cycle.\u003c\/li\u003e\n\u003cli\u003eIgnition is intermittent or takes longer than usual.\u003c\/li\u003e\n\u003cli\u003eVisible damage, swelling, or cracking on the existing igniter element.\u003c\/li\u003e\n\u003cli\u003eThe circuit breaker trips when the stove attempts to light.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDisconnect the appliance from its power source before servicing.\u003c\/li\u003e\n\u003cli\u003eClean ash and debris from the igniter tube and burn pot area.\u003c\/li\u003e\n\u003cli\u003eHandle the new element with care to avoid damage.\u003c\/li\u003e\n\u003cli\u003eEnsure the igniter is fully seated in its housing to the correct depth.\u003c\/li\u003e\n\u003cli\u003eConfirm all electrical connections are secure.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BlueStarsParts","offers":[{"title":"Default Title","offer_id":46274126545085,"sku":"AZ00834081","price":23.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2576\/7548\/files\/AZ00834081_1_1fb34f28-2e24-492a-a6a7-fa38460f2407.jpg?v=1767694056"},{"product_id":"srv7000660-igniter-replacement","title":"SRV7000-660 Igniter Replacement","description":"\u003ch2\u003eSRV7000-660 Igniter Replacement\u003c\/h2\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVoltage: 120V AC\u003c\/li\u003e\n\u003cli\u003ePower Rating: 300W\u003c\/li\u003e\n\u003cli\u003eOverall Length: 4 inches\u003c\/li\u003e\n\u003cli\u003eConnection Type: AMP style plug\u003c\/li\u003e\n\u003cli\u003eSheath Material: 310S stainless steel\u003c\/li\u003e\n\u003cli\u003eIncludes one igniter element and anti-seize compound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReplaces \/ Cross-Reference Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSRV7000-660\u003c\/li\u003e\n\u003cli\u003eSRV7000-660-AMP\u003c\/li\u003e\n\u003cli\u003ePH-660P\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility \u0026amp; Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePelPro Models:\u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003ePP60\u003c\/li\u003e\n\u003cli\u003ePP70\u003c\/li\u003e\n\u003cli\u003ePP130\u003c\/li\u003e\n\u003cli\u003ePPC90\u003c\/li\u003e\n\u003cli\u003eTSC90\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePleasant Hearth Models:\u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003ePH35PS\u003c\/li\u003e\n\u003cli\u003ePH50PS\u003c\/li\u003e\n\u003cli\u003ePH50CABPS\u003c\/li\u003e\n\u003cli\u003ePHC90\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eQuadra-Fire Models:\u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with select stove models requiring this part number.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to Replace\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStove fails to automatically ignite pellets.\u003c\/li\u003e\n\u003cli\u003eIgnition cycle is significantly longer than normal.\u003c\/li\u003e\n\u003cli\u003eVisible damage, cracking, or swelling on the igniter element.\u003c\/li\u003e\n\u003cli\u003eThe stove's control board indicates an ignition failure error.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAlways disconnect the stove from the power source before beginning service.\u003c\/li\u003e\n\u003cli\u003eAllow the existing igniter and stove components to cool completely.\u003c\/li\u003e\n\u003cli\u003eHandle the new igniter carefully by the base to avoid contaminating the element with skin oils.\u003c\/li\u003e\n\u003cli\u003eApply a small amount of the included anti-seize lubricant to the igniter tube threads for easier future removal.\u003c\/li\u003e\n\u003cli\u003eEnsure the wire connectors are fully seated and secure.\u003c\/li\u003e\n\u003cli\u003eRefer to your stove's service manual for model-specific instructions.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BlueStarsParts","offers":[{"title":"Default Title","offer_id":46274127003837,"sku":"AZ00249833","price":19.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2576\/7548\/files\/AZ00249833_1_c53dffa6-3a53-4c3f-8a62-791d2bf3813a.jpg?v=1767694084"},{"product_id":"spkfa1009-heater-spark-plug-fit-for-120210k-dyna-gl-dura-heat-thermoheat","title":"SP-KFA1009 Heater Spark Plug - Fits 120-210K Dyna Gl Dura Heat Thermoheat Heaters","description":"\u003ch2\u003eSP-KFA1009 \/ VE53F Heater Spark Plug\u003c\/h2\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Tension Ignition Electrodes:\u003c\/strong\u003e Engineered from a specialized, heat-resistant alloy designed to generate a consistent, high-intensity spark across a wide range of ambient temperatures, ensuring reliable ignition in sub-zero conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium Grade Ceramic Insulator:\u003c\/strong\u003e Features a high-density ceramic body that provides superior electrical insulation, preventing high-voltage \"leakage\" to the heater chassis and directing the full electrical discharge to the fuel stream.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoot \u0026amp; Carbon Resistance:\u003c\/strong\u003e The electrode geometry is optimized to reduce the accumulation of carbon and soot deposits, maintaining a clear spark path even during extended runs or when using lower-grade fuels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial Heat Stabilization:\u003c\/strong\u003e Manufactured to withstand the extreme internal combustion temperatures of high-BTU forced-air heaters without warping or losing electrical conductivity over time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReplaces \/ Cross-Reference Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Part:\u003c\/strong\u003e SP-KFA1009.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry Standards:\u003c\/strong\u003e VE53F, DFA400T2.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGHP Group Codes:\u003c\/strong\u003e 2154-0013-00, 2154001300.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eThis spark plug is the primary ignition component for large-capacity (120K to 210K BTU) forced-air kerosene and diesel heaters. Key compatible brands and models include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDyna-Glo:\u003c\/strong\u003e Fits models \u003cstrong\u003eKFA125DGD\u003c\/strong\u003e, \u003cstrong\u003eKFA125H\u003c\/strong\u003e, \u003cstrong\u003eKFA125L\u003c\/strong\u003e, \u003cstrong\u003eKFA125WH\u003c\/strong\u003e, \u003cstrong\u003eKFA170DGD\u003c\/strong\u003e, \u003cstrong\u003eKFA170WH\u003c\/strong\u003e, \u003cstrong\u003eKFA210DGD\u003c\/strong\u003e, and \u003cstrong\u003eKFA210H\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDura Heat:\u003c\/strong\u003e Compatible with various DFA series heaters including \u003cstrong\u003eDFA125\u003c\/strong\u003e, \u003cstrong\u003eDFA170\u003c\/strong\u003e, \u003cstrong\u003eDFA170T\u003c\/strong\u003e, and \u003cstrong\u003eDFA210\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermoheat:\u003c\/strong\u003e Direct fit for high-BTU models such as \u003cstrong\u003eKFA125\u003c\/strong\u003e and \u003cstrong\u003eKFA170\u003c\/strong\u003e series.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Fuel Units:\u003c\/strong\u003e Designed for heaters rated between 120,000 and 210,000 BTU that utilize kerosene, diesel, JP8, or Jet A fuel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e Not compatible with smaller 45K-80K BTU heaters, which often utilize a different electrode mounting bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to Replace\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeater Won't Ignite:\u003c\/strong\u003e The most common symptom; the fan runs and fuel is misting, but there is no \"clicking\" sound or spark to light the fuel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDelayed Ignition:\u003c\/strong\u003e The heater \"puffs\" white smoke for several seconds before finally igniting with a loud boom, indicating a weak or inconsistent spark.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCracked Ceramic Insulator:\u003c\/strong\u003e Visible hairline fractures in the white ceramic allow the spark to jump to the metal frame rather than the fuel nozzle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy Carbon Buildup:\u003c\/strong\u003e The electrodes are covered in a thick, black crust that prevents a clean spark from bridging the gap.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEroded Electrodes:\u003c\/strong\u003e Upon inspection, the metal tips of the spark plug are significantly shortened or rounded off from years of use, making the gap too wide for the transformer to jump.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First:\u003c\/strong\u003e **CRITICAL:** Always unplug the heater from the power source before performing maintenance. The ignition transformer produces several thousand volts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the Spark Gap:\u003c\/strong\u003e **PRO TIP:** Before installing, use a feeler gauge to verify the electrode gap. For most 120K-210K BTU heaters, the ideal gap is approximately \u003cstrong\u003e0.14\" to 0.16\" (3.5mm to 4.0mm)\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the Photocell:\u003c\/strong\u003e While you have the burner head open, wipe the \"Cad Cell\" (flame sensor) with a soft cloth. A dirty sensor will cause the heater to shut down even if the new spark plug works perfectly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle Alignment:\u003c\/strong\u003e Ensure the spark plug is centered over the fuel nozzle. If it is tilted, the spark may not hit the fuel mist correctly, leading to starting failures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTighten Carefully:\u003c\/strong\u003e Secure the mounting screw firmly so the plug doesn't vibrate out of alignment, but be careful not to over-tighten and crack the ceramic body.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BlueStarsParts","offers":[{"title":"Default Title","offer_id":46495303172285,"sku":"AZ00154425","price":16.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2576\/7548\/files\/AZ00154425_1.jpg?v=1773213041"},{"product_id":"propane-fuel-filter-f273699-with-6ft-hose-qcc1type1-adapter","title":"Propane Fuel Filter F273699 with 6FT Hose \u0026 QCC1\/Type1 Adapter for Buddy Series, Mr.Heater Buddy \u0026 Big Buddy Heaters, Connect 20-45 lb Propane Tanks","description":"\u003ch2\u003eF273699 Propane Fuel Filter \u0026amp; 6FT Hose Adapter Kit\u003c\/h2\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCSA Certified Safety:\u003c\/strong\u003e Both the hose and filter assembly are CSA certified, ensuring they meet rigorous North American safety standards for high-pressure propane gas handling and leak resistance.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContaminant \u0026amp; Oil Filtration:\u003c\/strong\u003e The F273699 filter is specifically engineered to trap heavy hydrocarbons and oily plasticizers found in bulk propane tanks, preventing them from clogging the sensitive regulator and pilot ODS of your heater.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-Pressure Reinforced Hose:\u003c\/strong\u003e The 6-foot hose is constructed from weather-resistant, fiber-reinforced polymer, providing the durability needed for outdoor use and the flexibility to keep your 20-45 lb tank at a safe distance.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool-Free QCC1 Adapter:\u003c\/strong\u003e Features a standard Type 1 (QCC1) connector with a large, ergonomic hand-tighten knob, allowing for a secure, leak-free connection to any standard US propane cylinder without a wrench.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInternal Brass Fittings:\u003c\/strong\u003e Equipped with solid brass connectors that resist corrosion and stripping, ensuring a precision fit on both the heater’s 1\"-20 throwaway cylinder threads and the bulk tank valve.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eReplaces \/ Cross-Reference Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFilter Component:\u003c\/strong\u003e F273699, 273699.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHose Component:\u003c\/strong\u003e F273704, F272701, F272702 (Hose Assembly).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard Kit Equivalents:\u003c\/strong\u003e 71131, B000K2NVG8.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAlternative Codes:\u003c\/strong\u003e PD00008432, AH273699, EA273699.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eThis filter and hose kit is designed specifically for portable propane heaters that typically run on 1lb cylinders but are being converted for use with bulk tanks. Key compatible models include:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMr. Heater Buddy Series:\u003c\/strong\u003e Fits the \u003cstrong\u003ePortable Buddy\u003c\/strong\u003e (F232000, MH9B), \u003cstrong\u003eBig Buddy\u003c\/strong\u003e (F232017, MH18B), and \u003cstrong\u003eHunting Buddy\u003c\/strong\u003e (F232050, MH12B).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMr. Heater Tough Buddy:\u003c\/strong\u003e Compatible with various industrial-grade portable units utilizing the 1\"-20 female thread inlet.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOther Brands:\u003c\/strong\u003e Works with most portable propane appliances that utilize a 1lb bottle connection, including tabletop grills and camping stoves.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTank Fitment:\u003c\/strong\u003e Connects directly to standard 20 lb, 30 lb, and 45 lb propane cylinders (standard BBQ style tanks).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e If you use a Mr. Heater \"Green Label\" hose (F273704), a filter is **required**. If you use the \"Black Label\" Buddy Hose (F271803), a filter is typically not needed as that hose does not leach oils.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen to Replace\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFilter Change Interval:\u003c\/strong\u003e The fuel filter should be replaced \u003cstrong\u003eannually\u003c\/strong\u003e or after every 20-40 lbs of propane usage to ensure the heater's pilot light doesn't become gummed up.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeater Won't Stay Lit:\u003c\/strong\u003e If the pilot flame is small, yellow, or constantly goes out, the filter may be saturated with oils and is restricting gas flow.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHose Stiffness or Cracking:\u003c\/strong\u003e Exposure to UV rays and extreme cold can cause the hose to become brittle. Replace immediately if you see any surface \"checking\" or cracks in the rubber.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSmell of Propane:\u003c\/strong\u003e If you detect the \"rotten egg\" scent of mercaptan near the hose or filter, use soapy water to check for leaks. If the leak is in the hose body, replace the entire kit.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOil in the Line:\u003c\/strong\u003e If you disconnect the hose and see a dark, oily liquid inside the connector, your current filter is full and must be replaced.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Tips\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFilter Position:\u003c\/strong\u003e **CRITICAL:** The F273699 filter MUST be installed directly into the heater's swivel connector. The hose then connects to the filter. Do not install the filter at the tank side.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHand Tighten Only:\u003c\/strong\u003e The QCC1 tank adapter and the 1\"-20 heater connector are designed for hand-tightening. Using a wrench can over-compress the internal gaskets and cause leaks.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThe Soap Bubble Test:\u003c\/strong\u003e After connecting to a full tank, spray a mixture of dish soap and water on all connections. If bubbles grow, the connection is not secure.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePurge the Air:\u003c\/strong\u003e When using a 6ft hose for the first time, it will be full of air. Hold the heater's pilot knob down for 30–60 seconds to \"bleed\" the air out before attempting to click the igniter.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eKeep it Clean:\u003c\/strong\u003e When not in use, keep the dust caps on the hose ends. A single grain of sand inside the filter or hose can ruin the heater's delicate internal regulator.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BlueStarsParts","offers":[{"title":"Default Title","offer_id":46495303303357,"sku":"AZ00125826","price":30.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2576\/7548\/files\/AZ00172120_1.jpg?v=1773213045"},{"product_id":"32225-wick-fit-for-kero-world-kw24c-duraheat-dh2300-dynaglo-2pack","title":"32225 Wick - ForKero World KW-24C DuraHeat DH-2300 Dyna-GLO CV-2300\u0026RMC-95C Envirotemp CV-2300 Keroheat Kerosene Heater - 2 Pack","description":"\u003ch2\u003eADQ56656403 Lint Filter Replacement - 11.2\" x 10.9\" Dryer Lint Filter Trap Screen Strainer - Replaces 4960837 AP7012980 PS16546780\u003c\/h2\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 11.2 inches x 10.9 inches\u003c\/li\u003e\n\u003cli\u003eTraps lint and debris to maintain dryer airflow\u003c\/li\u003e\n\u003cli\u003eDurable plastic frame with a fine mesh screen\u003c\/li\u003e\n\u003cli\u003eDirect replacement for specified part numbers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReplaces \/ Cross-Reference Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eADQ56656403\u003c\/li\u003e\n\u003cli\u003e4960837\u003c\/li\u003e\n\u003cli\u003eAP7012980\u003c\/li\u003e\n\u003cli\u003ePS16546780\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility \u0026amp; Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for select clothes dryer models.\u003c\/li\u003e\n\u003cli\u003eConfirm fitment by cross-referencing your original part number or measuring the filter housing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to Replace\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVisible damage, such as tears, holes, or a broken frame.\u003c\/li\u003e\n\u003cli\u003eFilter is warped and no longer fits securely.\u003c\/li\u003e\n\u003cli\u003eExcessive lint bypasses the screen.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDisconnect the dryer from its power source before servicing.\u003c\/li\u003e\n\u003cli\u003eRemove the old filter from its slot.\u003c\/li\u003e\n\u003cli\u003eClean any accumulated lint from the filter housing.\u003c\/li\u003e\n\u003cli\u003eSlide the new filter into place until it is fully seated.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BlueStarsParts","offers":[{"title":"Default Title","offer_id":46497316241597,"sku":"AZ00263117","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2576\/7548\/files\/AZ00263117_1.jpg?v=1765940100"},{"product_id":"f273699-propane-fuel-filter-for-mr-heater-buddy-2pack","title":"F273699 Propane Fuel Filter for Mr Heater, Buddy Heater, Big Buddy, Tough Buddy Heaters \u0026 Portable Buddy - 2 Pack","description":"\u003ch2\u003eF273699 Propane Fuel Filter\u003c\/h2\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePackage contains two (2) fuel filters.\u003c\/li\u003e\n\u003cli\u003eRemoves contaminants from propane supplied by bulk cylinders.\u003c\/li\u003e\n\u003cli\u003eProtects heater from oily residue and particles in the fuel line.\u003c\/li\u003e\n\u003cli\u003eDesigned for use with a bulk cylinder and hose assembly.\u003c\/li\u003e\n\u003cli\u003eConstructed from cast aluminum.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReplaces \/ Cross-Reference Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eF273699\u003c\/li\u003e\n\u003cli\u003e273699\u003c\/li\u003e\n\u003cli\u003eF276163\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility \u0026amp; Fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eHeater Models:\u003c\/b\u003e Mr. Heater Portable Buddy, Big Buddy, Tough Buddy\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHose Assemblies:\u003c\/b\u003e Recommended for use with F273701, F273702, F273703, F273718, F298802\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to Replace\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplace annually as part of routine maintenance.\u003c\/li\u003e\n\u003cli\u003eReplace immediately if the filter appears clogged or damaged.\u003c\/li\u003e\n\u003cli\u003eReplace if the heater exhibits inconsistent flame or signs of fuel starvation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure the propane cylinder valve is fully closed before installation.\u003c\/li\u003e\n\u003cli\u003eThe filter installs directly onto the heater's swivel regulator inlet.\u003c\/li\u003e\n\u003cli\u003eAttach the propane hose to the other end of the filter.\u003c\/li\u003e\n\u003cli\u003eCheck all connections for leaks with a soapy water solution before operating the heater.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BlueStarsParts","offers":[{"title":"Default Title","offer_id":46609420288189,"sku":"AZ00135185","price":26.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2576\/7548\/files\/AZ00135185_1.jpg?v=1775538256"}],"url":"https:\/\/bluestarspartstrend.com\/collections\/heater.oembed","provider":"BlueStars Parts","version":"1.0","type":"link"}