{"product_id":"dg9400520a-oven-burner-igniter","title":"DG94-00520A Oven Burner Igniter - For Samsung Range Microwave Oven Combo","description":"\u003ch2\u003eDG94-00520A Oven Burner Igniter\u003c\/h2\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRapid-Glow Silicon Carbide Element:\u003c\/strong\u003e Engineered to reach peak ignition temperatures within 30 to 60 seconds, ensuring a swift and reliable light-up for the gas burner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Function Compatibility:\u003c\/strong\u003e Specifically designed for use in both standard gas ranges and high-end microwave oven combos, providing the high-amperage draw necessary to trigger the safety gas valve.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerforated Stainless Steel Shield:\u003c\/strong\u003e Features a reinforced protective cage that guards the fragile ceramic heating element against physical impact and spills while optimizing heat radiation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Amperage Safety Interlock:\u003c\/strong\u003e Acts as a critical electrical resistor; the gas valve will only open when the igniter draws the exact current required, preventing gas flow during partial electrical failure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Plug-and-Play Design:\u003c\/strong\u003e Features a standardized two-pin male\/female connector and ceramic insulated leads, allowing for a fast, tool-free electrical connection in most modern Samsung cabinets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReplaces \/ Cross-Reference Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAP5577941\u003c\/li\u003e\n\u003cli\u003ePS4241428\u003c\/li\u003e\n\u003cli\u003e2692271\u003c\/li\u003e\n\u003cli\u003e114491\u003c\/li\u003e\n\u003cli\u003eEAP4241428\u003c\/li\u003e\n\u003cli\u003ePD00027453\u003c\/li\u003e\n\u003cli\u003eDS038KX\u003c\/li\u003e\n\u003cli\u003e41-230\u003c\/li\u003e\n\u003cli\u003eDG94-01441A\u003c\/li\u003e\n\u003cli\u003eIGNA027\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eThis hot surface igniter is the standard ignition component for Samsung-manufactured gas ranges and wall oven\/microwave combos. Key compatible series include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSamsung Microwave Oven Combos:\u003c\/strong\u003e Fits various NQ70 and NQ75 series wall oven combinations (e.g., NQ70M6650DS\/AA, NQ70M7770DS\/AA).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSamsung NX58 \u0026amp; NX60 Series:\u003c\/strong\u003e Compatible with hundreds of free-standing models including \u003cstrong\u003eNX58H5600SS\u003c\/strong\u003e, \u003cstrong\u003eNX58F5500SS\u003c\/strong\u003e, and \u003cstrong\u003eNX60T8511SG\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSamsung FX \u0026amp; NE Series:\u003c\/strong\u003e Fits various high-capacity gas ranges (e.g., FX510BGS, FX710BGS).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKenmore (402 Series):\u003c\/strong\u003e Compatible with 402-prefix gas ranges and oven combos produced by Samsung for Sears.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e In microwave-oven combos, this igniter is typically located in the \u003cstrong\u003elower oven cavity\u003c\/strong\u003e. Always verify if your specific unit uses the same part for both the bake and broil functions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to Replace\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOven Won't Light:\u003c\/strong\u003e The oven control board sends power, and the igniter may even glow faintly, but the gas valve never clicks open to release fuel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\"tE\" or \"HE\" Error Codes:\u003c\/strong\u003e Modern Samsung displays may throw these codes when the sensor detects that the burner hasn't reached ignition temperature within the allotted safety window.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntermittent Heating:\u003c\/strong\u003e The oven lights for the first cycle but fails to re-ignite during the \"cool-down\" phase to maintain the set temperature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDelayed Ignition (The \"Poof\" Sound):\u003c\/strong\u003e The igniter takes too long to reach full temperature, causing gas to pool in the cavity before finally igniting with a small bang.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisible White Cracks:\u003c\/strong\u003e Upon inspection, the black element shows visible white lines or \"pitting,\" which indicates the ceramic is breaking down and losing its resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First:\u003c\/strong\u003e Unplug the unit and \u003cstrong\u003eturn off the gas supply\u003c\/strong\u003e. Microwave oven combos are heavy and often built-in; ensure you have adequate support if sliding the unit out for access.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe \"Fragile\" Rule:\u003c\/strong\u003e **CRITICAL:** Do not touch the black silicon carbide element with your bare fingers. Natural skin oils can create \"hot spots\" that cause the igniter to crack the first time it heats up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccessing the Burner:\u003c\/strong\u003e For most ovens, remove the racks and the bottom floor plate. The igniter is usually held in place by two 1\/4\" hex screws on the side of the burner tube.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the Harness:\u003c\/strong\u003e While the connector is standard, check for any singed or melted wires in the original harness. If the old wires are damaged, they must be trimmed back and connected with ceramic wire nuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage Check:\u003c\/strong\u003e A healthy DG94-00520A should draw between 3.2 and 3.6 Amps when fully hot. If you have a clamp-on ammeter, you can test this before reassembling the oven floor.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BlueStarsParts","offers":[{"title":"Default Title","offer_id":45772994052285,"sku":"AZ51270908","price":36.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2576\/7548\/files\/AZ00118575_1_d019fd8d-f541-4ad9-b1c4-5453c2eb6f13.jpg?v=1762245888","url":"https:\/\/bluestarspartstrend.com\/products\/dg9400520a-oven-burner-igniter","provider":"BlueStars Parts","version":"1.0","type":"link"}