{"product_id":"w10612022-dryer-rear-drum-felt-seal-kit","title":"W10612022 Dryer Rear Drum Felt Seal Kit for Whirlpool, Maytag, Kenmore, Crosley Dryers","description":"\u003ch2\u003eW10612022 Dryer Rear Drum Felt Seal \u0026amp; Adhesive Kit\u003c\/h2\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Temperature Synthetic Felt:\u003c\/strong\u003e Manufactured from premium, heat-resistant synthetic fibers designed to maintain structural integrity and a flexible seal even under the intense, constant heat of heavy drying cycles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirtight Airflow Seal:\u003c\/strong\u003e Engineered to create a precise mechanical barrier between the rotating drum and the rear bulkhead, ensuring that heated air is forced through the laundry rather than escaping into the cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFriction-Reducing Surface:\u003c\/strong\u003e Features a specialized low-friction finish that allows the drum to rotate smoothly against the stationary rear panel, reducing the electrical load on the drive motor and preventing premature wear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial-Grade High-Heat Adhesive:\u003c\/strong\u003e Includes a tube of specialized high-temperature adhesive specifically formulated to bond the felt to the metal drum, providing a permanent hold that won't peel or degrade at 160°F+ temperatures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-Cut Length:\u003c\/strong\u003e Pre-measured to the exact factory specifications for 29-inch wide Whirlpool-built dryers, ensuring a perfect 360-degree seal without overlapping or gaps that cause air leaks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReplaces \/ Cross-Reference Part Numbers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Part Number:\u003c\/strong\u003e W10612022.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry Standards:\u003c\/strong\u003e AP5737110, PS8691753, EAP8691753.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther Codes:\u003c\/strong\u003e \u003cmeta charset=\"utf-8\"\u003eW10389561, AP3094267, PS334327.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eThis felt seal kit is the standard rear drum support and air-seal component for the vast majority of Whirlpool-manufactured dryers. Key compatible brands include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhirlpool \u0026amp; Kenmore:\u003c\/strong\u003e Fits hundreds of 29-inch front-load and top-load matched dryers including the \u003cstrong\u003eMEDC\u003c\/strong\u003e, \u003cstrong\u003eWED\u003c\/strong\u003e, and \u003cstrong\u003e110.\u003c\/strong\u003e series (e.g., MEDC215EW0).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaytag:\u003c\/strong\u003e Compatible with various Centennial and Bravos series units produced after the Whirlpool transition.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrosley, Amana, \u0026amp; Admiral:\u003c\/strong\u003e Direct fit for value-tier residential models utilizing the standard rear-seal configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKitchenAid, Estate, \u0026amp; Roper:\u003c\/strong\u003e Fits premium and legacy models built on the standardized 29-inch cabinet chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e This part is specifically for the \u003cstrong\u003eRear\u003c\/strong\u003e of the drum. If your dryer is making noise at the front, you likely need the front felt seal (WPW10314173) or drum glides instead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen to Replace\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScraping or Thumping Noise:\u003c\/strong\u003e The felt has worn down or flattened, allowing the metal drum to rub directly against the stationary rear metal bulkhead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorn or Ruined Clothing:\u003c\/strong\u003e If the seal is loose or missing sections, clothes can get caught in the gap between the drum and the rear panel, resulting in \"pinch marks,\" brown oil stains, or torn fabric.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcessive Drying Times:\u003c\/strong\u003e A failed seal allows hot air to bypass the drum; if you notice your dryer is taking two cycles to dry a standard load, the seal may be leaking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Marks on Clothes:\u003c\/strong\u003e Worn-out felt can release synthetic fibers or allow internal grease to reach the drum, leaving dark streaks on white fabrics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisible Felt Protruding:\u003c\/strong\u003e You can see bits of gray or white felt inside the drum or falling out of the back of the dryer cabinet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety First:\u003c\/strong\u003e \u003cstrong\u003eCRITICAL:\u003c\/strong\u003e Unplug the dryer from the 240V power source. You will need to remove the top and front panels and pull the drum completely out of the cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Preparation:\u003c\/strong\u003e \u003cstrong\u003ePRO TIP:\u003c\/strong\u003e Use a putty knife and rubbing alcohol to remove every trace of the old adhesive and felt from the drum rim. The new adhesive will not bond correctly to old residue.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive Application:\u003c\/strong\u003e Apply a continuous, thin \"bead\" of the included adhesive around the drum flange. Do not over-apply; a thin, even layer provides the strongest bond and prevents \"squeeze-out\" onto the felt surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrient the \"Tail\":\u003c\/strong\u003e Ensure the seam (where the two ends of the felt meet) is positioned correctly according to the original factory orientation, usually at the top of the drum when at rest.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure Time:\u003c\/strong\u003e \u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e You MUST let the adhesive dry for at least \u003cstrong\u003e4 to 8 hours\u003c\/strong\u003e (preferably overnight) before running the dryer. If you start a cycle too early, the heat and centrifugal force will cause the seal to peel off immediately.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BlueStarsParts","offers":[{"title":"Default Title","offer_id":46393914228925,"sku":"AZ00254834","price":23.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2576\/7548\/files\/AZ00142941_1_3c17dcb9-62b4-4212-b3aa-ecaf2178fb29.jpg?v=1770708336","url":"https:\/\/bluestarspartstrend.com\/products\/w10612022-dryer-rear-drum-felt-seal-kit","provider":"BlueStars Parts","version":"1.0","type":"link"}