Best Seller 3392519 Dryer Thermal Fuse - For Whirlpool Kenmore - 2 Pack
Two 3392519 dryer thermal fuses with white plastic housing and metal terminals, shown with BlueStars packaging.
Comparison graphic showing the durable construction of a 3392519 dryer thermal fuse versus a fragile alternative.
3392519 dryer thermal fuse replacement part for Whirlpool and Kenmore dryers shown on an informational graphic.
Four-step installation guide for replacing a 3392519 dryer thermal fuse in Whirlpool and Kenmore dryers.
Dimensional diagram of 3392519 dryer thermal fuse showing width, length, and terminal spacing measurements.
3392519 dryer thermal fuse replacement part with compatibility list and dryer diagram.
Close-up of 3392519 dryer thermal fuse showing flame-resistant metal terminals and wear-resistant ABS plastic housing.
Two 3392519 dryer thermal fuses with white plastic housing and metal terminals, shown with BlueStars packaging.
Comparison graphic showing the durable construction of a 3392519 dryer thermal fuse versus a fragile alternative.
3392519 dryer thermal fuse replacement part for Whirlpool and Kenmore dryers shown on an informational graphic.
Four-step installation guide for replacing a 3392519 dryer thermal fuse in Whirlpool and Kenmore dryers.
Dimensional diagram of 3392519 dryer thermal fuse showing width, length, and terminal spacing measurements.
3392519 dryer thermal fuse replacement part with compatibility list and dryer diagram.
Close-up of 3392519 dryer thermal fuse showing flame-resistant metal terminals and wear-resistant ABS plastic housing.
Lifetime Warranty

3392519 Dryer Thermal Fuse - For Whirlpool Kenmore - 2 Pack

Save 13%
0.00
$12.32
$14.17
$12.32
In stock
Fast delivery

Secure and trusted checkout with

  • Visa
  • Mastercard
  • American Express
  • PayPal
  • Diners Club
  • Discover
Contact for wholesale
🛠️
CONFIRM THE FIT FOR YOUR MODEL
Enter your model number

3392519 Dryer Thermal Fuse

Key Features

  • Single-use, non-resettable thermal fuse.
  • Opens at approximately 196°F (91°C) to cut power during overheating.
  • Designed to meet original equipment specifications for fit and performance.
  • Dimensions: 2 in. L x 0.5 in. W.

Replaces / Cross-Reference Part Numbers

  • 3392519
  • WP3392519
  • WP3392519VP
  • 3388651
  • 694511
  • 80005
  • AP6008325
  • PS11741460
  • EAP11741460
  • ET401

Compatibility & Fitment

  • Fits a wide range of electric and gas dryers.
  • Compatible with brands including Whirlpool, Kenmore, Maytag, Roper, and KitchenAid.
  • Confirm fitment with your dryer's model number before purchase.

When to Replace

  • Dryer will not start.
  • Dryer tumbles but produces no heat.
  • Dryer shuts off prematurely during a cycle.
  • Existing fuse shows no continuity when tested with a multimeter.

Installation Tips

  • Disconnect the dryer from its power source before starting the repair.
  • Before replacing a blown fuse, identify and correct the cause of overheating.
  • Thoroughly clean the lint screen, internal ductwork, and external vent pipe to ensure proper airflow.
  • Inspect the blower wheel for damage or obstructions.
  • For a more comprehensive repair, consider also replacing the high-limit and cycling thermostats.
Product image 1
Product image 2
Product image 1
Product image 2
Product image 1
Product image 2
  • WIDE COMPATIBILITY

    WIDE COMPATIBILITY

    Our Thermal Fuse fits Whirlpool, Kenmore, Maytag Washers and more
  • NON-CRACKING DESIGN

    NON-CRACKING DESIGN

    This Thermal Fuse is made of sturdy ABS platsic which is strong and wear-resistant, enhancing durability
  • BEST SOLUTION

    BEST SOLUTION

    BlueStars brings DIY solutions to help you deal with any trouble
  • SIMPLE INSTALLATION

    SIMPLE INSTALLATION

    Just 5 minutes of replacing to make your Dryer run like new!
4 SIMPLE STEPS

4 SIMPLE STEPS

1. Locate the thermal fuse behind the dryer back panel; 2. Remove the wires going to the two thermal fuse terminals; 3. Unscrew the mounting screw to remove the old thermal fuse; 4. Make sure to clean the dryer vent and blower housing. Reinstall with our new part!
WIDE COMPATIBILITY

WIDE COMPATIBILITY

Compatible with many top-name brands: Whirlpool, Kenmore, KitchenAid, Roper, Estate, Inglis, Maytag, Crosley, Amana, Admiral, Magic Chef
Rated Temperature
‎196°F (91°C)
Reset Type
‎Non-resettable (one-time / single-blow fuse)
Terminals
‎2 x 3/16" spade terminals
Material
‎Metal / Plastic
Color
‎White / Black / Brass
Overall Dimensions
‎3/4" L x 9/16" W x 2" H
Mounting
‎Attaches to blower wheel housing

FAQ

The most common symptom is a dryer that runs but will not heat, or a dryer that simply will not start at all. If the thermal fuse blows, it acts as a safety device to cut power to the heating element or the motor. You can confirm the failure by using a multimeter to test for continuity across the two terminals of the fuse; if there is no continuity, the fuse is blown and must be replaced.
The primary cause is restricted airflow. When the dryer vent hose, lint screen, or internal exhaust ducting becomes clogged with lint, the dryer cannot dissipate heat properly. This causes the temperature inside the unit to rise to unsafe levels, triggering the fuse to blow as a fire-prevention measure. Always clean your vent line and ensure the exterior exhaust hood is clear before installing a new fuse.
This fuse is compatible with a wide range of dryers manufactured by Whirlpool, Kenmore, KitchenAid, Maytag, and Roper. It is designed to fit most standard residential dryers from these brands that utilize this specific safety component.
This part serves as a direct replacement for OEM part number 3392519 and WP3392519. It also cross-references with AP6008325, 3388651, 694511, 80005, WP3392519VP, G4AP0500, and ET401.
Installation is generally straightforward and can typically be completed in 15 to 30 minutes. You will usually need a screwdriver (often a 1/4-inch nut driver) to remove the back or front panel of the dryer to access the blower housing where the fuse is mounted. Always disconnect the power supply to the dryer before beginning any repair.
Yes. Because a blown fuse is almost always a symptom of an airflow issue, you should inspect your entire exhaust venting system from the back of the dryer to the outside of your home. If you replace the fuse without clearing the blockage, the new fuse will likely blow again immediately.