Best Seller 954-04260 Drive Belt for MTD Craftsman Cub Cadet Troy-Bilt Snowblower & 21" Mower
954-04260 3/8 inch x 34 inch replacement drive belt for MTD, Craftsman, and Cub Cadet snowblowers in retail packaging.
954-04260 replacement drive belt for MTD, Craftsman, Cub Cadet, and Troy-Bilt snowblowers and lawn mowers.
954-04260 drive belt specification chart showing 3/8 inch width and 34 inch length for snowblower and mower parts.
954-04260 drive belt for MTD, Craftsman, Cub Cadet, and Troy-Bilt snowblowers and walk-behind lawn mowers.
Infographic showing 954-04260 aramid drive belt features including chloroprene rubber and fiber cord construction.
Infographic showing a lawn mower and snowblower to illustrate symptoms fixed by the 954-04260 drive belt replacement.
Informational graphic for 954-04260 drive belt installation tips and maintenance checks.
BlueStars 954-04260 replacement drive belt comparison chart showing performance benefits over standard belts.
BlueStars 954-04260 replacement drive belt for snowblowers and lawn mowers, shown in a promotional graphic.
954-04260 3/8 inch x 34 inch replacement drive belt for MTD, Craftsman, and Cub Cadet snowblowers in retail packaging.
954-04260 replacement drive belt for MTD, Craftsman, Cub Cadet, and Troy-Bilt snowblowers and lawn mowers.
954-04260 drive belt specification chart showing 3/8 inch width and 34 inch length for snowblower and mower parts.
954-04260 drive belt for MTD, Craftsman, Cub Cadet, and Troy-Bilt snowblowers and walk-behind lawn mowers.
Infographic showing 954-04260 aramid drive belt features including chloroprene rubber and fiber cord construction.
Infographic showing a lawn mower and snowblower to illustrate symptoms fixed by the 954-04260 drive belt replacement.
Informational graphic for 954-04260 drive belt installation tips and maintenance checks.
BlueStars 954-04260 replacement drive belt comparison chart showing performance benefits over standard belts.
BlueStars 954-04260 replacement drive belt for snowblowers and lawn mowers, shown in a promotional graphic.

954-04260 Drive Belt for MTD Craftsman Cub Cadet Troy-Bilt Snowblower & 21" Mower

0.00
$10.99
Save 11% $12.31
$10.99
In stock
Fast Delivery Delivery options available at checkout
30 Day Returns Return Policy

Secure and trusted checkout with

  • Mastercard
  • Visa
  • American Express
  • Discover
  • JCB
  • Diners Club
CONFIRM THIS PART FITS
Enter appliance or equipment model number to verify compatibility with this part

954-04260 Drive Belt | 34"

Key Features

  • Type: V-Belt
  • Application: Wheel Drive
  • Length: 34 in
  • Width: 3/8 in
  • Material: Rubber compound with aramid fiber reinforcement cords for tensile strength and durability.

Replaces / Cross-Reference Part Numbers

  • 954-04260
  • 954-04259A
  • 754-04259
  • 754-04260
  • 265-472
  • KVLR10394

Compatibility & Fitment

  • Brands: Fits select models from MTD, Cub Cadet, Troy-Bilt, and Craftsman.
  • Lawn Mowers: Designed for 21-inch self-propelled, walk-behind mowers.
  • Snow Throwers: Fits various two-stage snow thrower models, manufactured 2010 and later.
  • Other Equipment: Also used on select chipper-shredder vacuums.
  • Example Models: 526 SWE, C224, Cub Cadet 12ABB2M5710 (2017) Sc 300 Hw.
  • Note: Always verify the part number required for your specific model by checking the owner's manual or original part.

When to Replace

  • Visible wear such as cracking, fraying, glazing, or deep abrasions.
  • Belt has become stretched, causing slippage or loss of drive engagement.
  • Audible squealing or chirping from the drive system during operation.
  • Scheduled preventative maintenance as recommended by the equipment manufacturer.

Installation Tips

  • Before installation, disconnect the spark plug wire for safety.
  • Refer to your equipment's owner's manual for specific belt routing and replacement procedures.
  • Ensure all pulleys are clean and free of debris.
  • Verify correct belt tension after installation to prevent slippage or excessive wear. Do not over-tighten.
954-04260 Drive Belt for MTD Craftsman Cub Cadet Troy-Bilt Snowblower & 21" Mower 1
954-04260 Drive Belt for MTD Craftsman Cub Cadet Troy-Bilt Snowblower & 21" Mower 2
954-04260 Drive Belt for MTD Craftsman Cub Cadet Troy-Bilt Snowblower & 21" Mower 3
954-04260 Drive Belt for MTD Craftsman Cub Cadet Troy-Bilt Snowblower & 21" Mower 4
954-04260 Drive Belt for MTD Craftsman Cub Cadet Troy-Bilt Snowblower & 21" Mower 5
  • 954-04260 Drive Belt for MTD Craftsman Cub Cadet Troy-Bilt Snowblower & 21" Mower 1

    PART NUMBERS

    This Drive Belt replaces part numbers: Cub C_adet / MTD / Troy Bilt 754-04260, 954-04260, 754-04259, 954-04259A, Stens 265-472
  • 954-04260 Drive Belt for MTD Craftsman Cub Cadet Troy-Bilt Snowblower & 21" Mower 2

    SAVING SOLUTION

    Enjoy the great feeling when your mower is repaired and works like before - BlueStars brings DIY solutions to help you deal with any trouble
  • 954-04260 Drive Belt for MTD Craftsman Cub Cadet Troy-Bilt Snowblower & 21" Mower 3

    FIX ENGINE'S SYMPTOMS

    Uneven Snow Blowing/ Lawn Mowing Operation, Loud or Unusual Noises, Excessive Vibration, Burning Smell, Slipping or Stalling Blades
  • 954-04260 Drive Belt for MTD Craftsman Cub Cadet Troy-Bilt Snowblower & 21" Mower 4

    IMPORTANT NOTE

    This is a replacement part designed to be compatible with certain appliances. Any brand names mentioned are used solely to indicate compatibility.
CHECK BEFORE INSTALLING

CHECK BEFORE INSTALLING

Pulley Bearings: Make sure they spin freely, as damaged bearings can increase friction and wear | Pulleys Edges: Rust or sharp edges can cause belt damage | Pulley Grooves: Clean debris from the pulley grooves | Tensioner Spring: A weak spring can lead to belt slippage and increased friction
4 SIMPLE STEPS

4 SIMPLE STEPS

1. Remove the ignition key and spark plug wire(s) to prevent starting | 2. Remove the belt covers. Release the tension on the idler deck arm | 3. Remove the mower deck belt from around all the pulleys | 4. Reinstall with our new part. Check to ensure it's properly running through all the pulleys.
#1 SOURCE OF HIGH-QUALITY REPLACEMENT PARTS

#1 SOURCE OF HIGH-QUALITY REPLACEMENT PARTS

Enjoy the comfort that our small yet mighty parts simplify your blowing experience

Compatible Models

Locate the model number of your appliance or equipment on the manufacturer's label and use it to check compatibility before ordering

Loading compatible models…

FAQs

This belt is used across multiple MTD-built machines, not just one brand. It is commonly listed for Cub Cadet, Craftsman, Troy-Bilt, MTD, MTD Gold, Bolens, White Outdoor, Huskee, Yard Machines, and Yard-Man equipment. Applications commonly include self-propelled walk-behind lawn mowers (2010 and later), some 21-inch walk-behind mowers, chipper-shredder vacuums, and many two-stage snow blowers. Because MTD used this belt on several platforms, the safest way to confirm fit is by matching your exact model number and the original belt number from your machine.
Confirmed numbers associated with this belt include 954-04260, 754-04260, 754-04259, 954-04259A, 490-501-C005, 490-501-F005, 490-501-Y005, CMXGZAM501005, and 265-472. Matching one of these numbers to your original belt or parts list is a good way to verify compatibility.
It is commonly identified as a drive belt, but on some equipment listings it is also used in snow blower auger-drive applications. MTD-family machines can use the same belt number in different roles depending on the model. Do not rely on the equipment type alone—verify by your model number and original part number to make sure you are replacing the correct belt position.
Typical symptoms include a self-propelled mower that stops pulling, weak or intermittent ground drive, a snow blower attachment that slips under load, squealing during engagement, visible belt glazing or cracking, frayed belt edges, or a belt that has stretched enough to reduce tension. If the machine drives poorly only when hot or under heavier load, belt wear or stretching is a common cause.
This belt is commonly listed as 3/8 inch top width and about 34 inches long, with published lengths around 34.13 to 34.18 inches depending on how the specification is stated. Always match by part number first, since belts with very similar dimensions may not interchange correctly on pulley-driven outdoor equipment.
On most walk-behind mowers or snow blowers, this is usually a moderate DIY repair. Expect roughly 20 to 60 minutes depending on access. Common tools are a socket set or nut driver, screwdrivers, and possibly pliers. On mowers, belt cover and pulley access are usually the main steps. On snow blowers, you may need to remove guards or covers and route the belt correctly around idlers. Taking a photo of the old belt path before removal helps prevent routing mistakes.
Inspect the pulleys for rust, wobble, or sharp edges, check idler pulleys and tension springs for free movement, and make sure the belt guides are not bent into the belt path. If the old belt failed suddenly, also look for seized pulley bearings or misalignment. On self-propelled mowers, verify the drive cable is adjusted correctly. On snow blowers, confirm the engagement system is moving fully so the new belt can tension properly.