Best Seller 954-04060B, 954-04060C Deck Drive Belt, 42" Cub Cadet Troy-Bilt LT1040 LT1042, 96.5"

954-04060B, 954-04060C Deck Drive Belt, 42" Cub Cadet Troy-Bilt LT1040 LT1042, 96.5"

0.00
$27.29
Save 16% $32.47
$27.29
In stock
Fast Delivery Delivery options available at checkout
30 Day Returns Return Policy

Secure and trusted checkout with

  • Mastercard
  • Visa
  • American Express
  • Discover
  • JCB
  • Diners Club
CONFIRM THIS PART FITS
Enter appliance or equipment model number to verify compatibility with this part

954-04060B, 954-04060C Deck Drive Belt | 96.5"

Key Features

  • Dimensions: 96 1/2 inch (Length) x 1/2 inch (Width)
  • Material: High-strength aramid cord construction for durability and wear resistance
  • Function: Transfers power from the engine pulley to the mower deck spindles to rotate the cutting blades

Replaces / Cross-Reference Part Numbers

  • Cub Cadet / MTD / Troy-Bilt: 754-04060, 754-04060A, 754-04060B, 754-04060C, 954-04060, 954-04060B, 954-04060C, 954-05056
  • John Deere: GX10851

Compatibility & Fitment

  • Designed for lawn tractors and riding mowers with a 42-inch cutting deck.
  • Cub Cadet Models: LT1040, LT1042, LTX1040, LTX1042
  • Troy-Bilt Models: TB42 (13A278KS066)
  • John Deere / Sabre Models: Sabre 1438GS
  • Also fits various MTD, Craftsman, and other branded mowers that specify one of the cross-referenced part numbers. Verify your owner's manual for the correct part number.

When to Replace

  • Visible signs of wear such as cracking, glazing, fraying, or separation.
  • Uneven or poor cutting performance due to belt slippage.
  • Audible squealing or chirping from the mower deck during operation.
  • The existing belt is broken or stretched beyond its operational limit.

Installation Tips

  • Before installation, disconnect the spark plug wire and engage the parking brake for safety.
  • Document the original belt routing with a photo or diagram before removing the old belt.
  • Inspect all deck pulleys, spindles, and idler arms for wear, damage, or seizure. Replace as needed.
  • Ensure the new belt is properly seated in all pulley grooves without twists.
  • Refer to your mower's service manual for specific instructions on belt tensioning and replacement procedures.
954-04060B, 954-04060C Deck Drive Belt, 42" Cub Cadet Troy-Bilt LT1040 LT1042, 96.5" 1
954-04060B, 954-04060C Deck Drive Belt, 42" Cub Cadet Troy-Bilt LT1040 LT1042, 96.5" 2
954-04060B, 954-04060C Deck Drive Belt, 42" Cub Cadet Troy-Bilt LT1040 LT1042, 96.5" 3
954-04060B, 954-04060C Deck Drive Belt, 42" Cub Cadet Troy-Bilt LT1040 LT1042, 96.5" 4
  • 954-04060B, 954-04060C Deck Drive Belt, 42" Cub Cadet Troy-Bilt LT1040 LT1042, 96.5" 1

    REPLACES PART NUMBERS

    Replaces SPM201671081, 754-04060, 754-04060A, 754-04060B, 954-04060, 954-04060A, 954-04060B, 954-04060C, GX10851, M118790, M125218, M71817, 265-201, 75-813.
  • 954-04060B, 954-04060C Deck Drive Belt, 42" Cub Cadet Troy-Bilt LT1040 LT1042, 96.5" 2

    COST-SAVING SOLUTION

    Bring your mower back to peak performance with a simple DIY replacement and save on repair costs.
  • 954-04060B, 954-04060C Deck Drive Belt, 42" Cub Cadet Troy-Bilt LT1040 LT1042, 96.5" 3

    FIX MOWER SYMPTOMS

    Solves uneven cutting, unusual noise, excessive vibration, burning smell, and slipping or stalled blades.
  • 954-04060B, 954-04060C Deck Drive Belt, 42" Cub Cadet Troy-Bilt LT1040 LT1042, 96.5" 4

    IMPORTANT NOTE

    This replacement part is designed for compatibility with select models. Brand names are used for reference only.
CHECK BEFORE INSTALLING

CHECK BEFORE INSTALLING

Pulley Bearings: Make sure they spin freely, as damaged bearings can increase friction and wear | Pulleys Edges: Rust or sharp edges can cause belt damage | Pulley Grooves: Clean debris from the pulley grooves | Tensioner Spring: A weak spring can lead to belt slippage and increased friction
4 SIMPLE STEPS

4 SIMPLE STEPS

1. Remove the ignition key and spark plug wire(s) to prevent starting | 2. Remove the belt covers. Release the tension on the idler deck arm | 3. Remove the mower deck belt from around all the pulleys | 4. Reinstall with our new part. Check to ensure it's properly running through all the pulleys.
#1 SOURCE OF HIGH-QUALITY REPLACEMENT PARTS

#1 SOURCE OF HIGH-QUALITY REPLACEMENT PARTS

Enjoy the comfort that our small yet mighty parts simplify your mowing experience

Compatible Models

Locate the model number of your appliance or equipment on the manufacturer's label and use it to check compatibility before ordering

Loading compatible models…

FAQs

This belt is used on many 42-inch deck lawn tractors across multiple brands, including Cub Cadet, Troy-Bilt, MTD, Craftsman, and John Deere. Common model examples mentioned for this belt family include Cub Cadet LT1040, LT1042, LTX1040, and LTX1042. Because 42-inch decks can use different belt routings by frame design and year, the safest match is to confirm your original belt number or model diagram before ordering.
Known replacement and cross-reference numbers for this belt include 954-04060B, 954-04060C, 954-04060, 754-04060, 754-04060B, 754-04060C, GX10851, 336351B, 490-501-Y044, and 754-05056. Matching the belt by part number is more reliable than matching by mower brand alone.
Typical symptoms include the blades not engaging, weak or uneven cutting, belt squealing when the PTO is turned on, visible cracking or fraying, glazing on the belt sides, or the belt jumping off the pulleys. A stretched belt can also cause poor blade speed even if it still looks intact.
For most riding mowers in this belt group, installation is a moderate DIY job. It commonly takes about 30 to 60 minutes. Basic tools may include work gloves, a socket or wrench set, and pliers for deck pins or guards, depending on the mower. On many models, access is easier if the deck is lowered fully or removed first. Routing the belt correctly around the mandrel pulleys, idlers, and engine pulley is the most important step.
The most common causes are normal wear, heat buildup, running with seized or rough idler pulleys, worn spindle bearings, bent belt keepers, and debris packed around the deck. Belt damage also happens when the deck is engaged at high engine load or when the belt is routed incorrectly after service. If a new belt fails quickly, inspect the pulleys and spindle bearings rather than replacing the belt again alone.
Before installing, check that the deck pulleys spin freely, the idler tensioner moves smoothly, the spring is intact, and the belt guides are not bent into the belt path. Clean packed grass from the deck, inspect spindle bearings for play or noise, and compare the new belt number with your old one. If the old belt came off repeatedly, verify the pulley alignment and keeper spacing before running the mower.