279834 Dryer Gas Valve Ignition Solenoid Coil Kit - Whirlpool Kenmore Maytag - 6 Pack
0.00
Regular price
$29.69
Regular price
Save 11%
$33.25
Sale price
$29.69
Fast Delivery
Delivery options available at checkout
30 Day Returns
Return Policy
CONFIRM THIS PART FITS
Enter appliance or equipment model number to verify compatibility with this part
Replaces Part Numbers
279834 Dryer Gas Valve Ignition Solenoid Coil Kit - Pack of 6
Key Features
- Includes six sets of two. Each set contains one 2-terminal coil and one 3-terminal coil.
- Engineered to open the gas valve, allowing gas to flow and ignite for heating.
- Direct replacement for specific gas dryer models.
- Constructed from durable metal and plastic components.
- Corrects common dryer heating problems.
Replaces / Cross-Reference Part Numbers
- AP3094251
- PS334310
- 279834VP
- 12001349
- 694540
- 306105
- 306106
- SCA700
- AH334310
- EA334310
Compatibility & Fitment
Designed for use with most major gas dryer brands including Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Estate, and Inglis. Fits dryers that utilize a two-coil gas valve system.
When to Replace
- Dryer drum tumbles, but no heat is produced.
- Dryer heats intermittently or takes too long to dry.
- The igniter glows, but the gas burner fails to light.
- A continuity test on existing coils indicates failure.
Installation Tips
- Disconnect the dryer from its power source and shut off the gas supply before beginning the repair.
- Access the gas valve assembly, typically located at the bottom of the dryer.
- Remove the mounting bracket and wires from the old coils.
- Install the new coils in the correct positions; the 2-terminal and 3-terminal coils are not interchangeable.
- Reconnect the wires and re-secure the assembly before restoring power and gas.
-
FIX DRYER'S SYMPTOMS
No heat or not enough heat | Takes too long to dry | Shuts off too soon | Timer will not advance. -
RELIABLE QUALITY
Designed with ultra-durable plastic & metal case for a long-lasting and stable drying performance -
SAVING SOLUTION
Enjoy the great feeling when your dryer is repaired and works properly like before - BlueStars brings DIY solutions to help you deal with any trouble -
IMPORTANT NOTE
This is a replacement part designed to be compatible with certain appliances. Any brand names mentioned are used solely to indicate compatibility.
4 SIMPLE STEPS
1. Push the clip with a putty knife, disconnect the switch wire to remove the top front panel; 2. Detach the wiring harness from both solenoid coil, remove the screw to release the bracket; 3. Pull the old solenoid coil off of the gas valve; 4. Install the new solenoid coils by sliding them onto the gas valve shaft and secure them with the bracket and screws
Compatible Models
Locate the model number of your appliance or equipment on the manufacturer's label and use it to check compatibility before ordering
Loading compatible models…
Color
Black / White
Material
Plastic / Metal
Kit Contents
1× 2-Terminal Secondary Coil + 1× 3-Terminal Primary Boost/Hold Coil
2-Terminal Coil Dimensions
3-3/16 x 2 x 5/8 inches
3-Terminal Coil Dimensions
1-3/8 x 15/16 x 1-1/8 inches
Item Weight
0.2 lbs
FAQs
Suggestions
Common Model Number Locations
Need help finding your model number? Select your appliance or lawn equipment below for location diagrams
- Above the refrigerant valves on the back of the air conditioner
- On the side of the unit near the run capacitor or electrical lines that go into your home
- On either side of the exterior
- On the back of the unit where the power cord is located
- In the cool air exhaust port
- To the left of the fan opening, on the weather barrier
- Below the control panel
- On either side of the exterior
- Behind the front grill on the frame
- On the door frame
- On the inside of the tub wall
- Behind the control panel
- On the door
- Inside the edge of the unit
- On the back exterior
- On the door
- On the side of hose storage
- Inside the edge of the unit
- On inside of the door
- On the door frame
- On the back exterior of the unit
- On the exterior side of the unit
- Behind the control panel
- On the inside of the door
- On the door frame
- On the exterior side of the unit
- At the top of the unit
- On the inside of the dryer door
- On the door frame
- Under the washer lid
- On either side of the exterior
- On the back exterior of the unit
- On the door frame
- On the exterior side of the unit
- On interior wall
- On the control panel
- On side of door
- On the right-hand side of the vent, under the control panel
- On the interior wall of the microwave (microwave model number only)
- On the door frame
- On the rear panel
- On the exterior back of the unit
- Inside the top part of the vent duct (in down-draft models)
- Underneath a burner
- Underneath a knob
- Underneath the cooktop (lift-up style)
- Bottom of cooktop
- On an exterior wall
- On an inside wall
- On the door frame
- On the right-hand side of the vent, under the control panel
- On the interior wall of the microwave (microwave model number only)
- On the door frame
- On the rear panel
- Behind the control panel
- Under the front surface unit
- On the door frame
- Interior side panel
- On the exterior of the unit
- On the inside of the lower storage compartment wall
- On top the hood
- Behind the filter
- Under the hood
- On the inside of the door
- On the exterior back of the unit
- Inside on the rear wall
- On the exterior side of the unit
- On door jamb
- On rear of frame
- Behind front panel
- On ceiling of refrigerator
- On interior wall
- On the inside of the door
- Behind crisper drawer
- Behind kickplate
- On ceiling of refrigerator
- On interior wall
- On door frame
- Behind crisper drawer
- Behind kickplate
- On ceiling of freezer
- On interior wall
- On the inside of the door
- Behind kickplate
- On the exterior side of the unit
- On inside of the door
- On the door frame
- On the back exterior of the unit
- On the front exterior of the unit
- On the control panel
- Inside the lid
- Under the lid on the frame
- On the exterior of the unit
- At the top of the unit
- On the inside of the dryer door
- On the door frame
- Under the washer lid
- On either side of the exterior
- On the top center of heater
- On the exterior of the unit
- On the starter housing
- On the side of the housing, behind the top handle
- On the side of the motor housing
- Near the rear grip
- On the top or sides of the engine housing
- On the gas tank
- On the recoil housing
- On the handle bars
- On top of the engine cover
- Near discharge chute, often behind chute flaps
- On rear of the deck, behind the engine
- Dash panel
- Back of mower/rear bumper
- Underside of the seat
- Lower side of hood, near engine
- Frame (beneath the seat, footrest)
- Mower deck
- Underside of the seat
- Frame beneath or near the seat
- Back of mower/rear bumper
- Lower left side between gas tank and mower deck
- Under the foot plate
- On the rear of the blower
- Inside of vacuum canister
- Side of the motor housing
- On the rear base of the vacuum
- On the bottom of the belly of the vacuum
- On the frame near the engine
- On the side of the auger housing
- On the lower rear of the snow blower between wheels
- On the side of the motor housing
- On the shaft
Select an appliance to see where its model number is located.
