Dryer Parts 306508 Dryer Tumbler Front Glide Bearing Kit for Whirlpool Maytag Dryers - Replaces 306508VP 312941 3-6508 - 2 Pack
Two sets of clothes dryer tumbler front glide bearings with blue strips and rivets for Whirlpool and Maytag dryers.
Dimensional diagram of 306508 dryer front glide bearing kit components with measurements.
White clothes dryer compatible with Whirlpool and Maytag, illustrating symptoms fixed by 306508 glide bearing kit.
Clothes dryer tumbler front glide bearing kit component with cork strip, blue support bracket, and two metal rivets.
Infographic showing components of 306508 dryer front glide bearing kit including blue glides, cork pads, and rivets.
Woman holding a green towel in front of a dryer, promoting BlueStars DIY repair for Whirlpool and Maytag dryers.
Two sets of clothes dryer tumbler front glide bearings with blue strips and rivets for Whirlpool and Maytag dryers.
Dimensional diagram of 306508 dryer front glide bearing kit components with measurements.
White clothes dryer compatible with Whirlpool and Maytag, illustrating symptoms fixed by 306508 glide bearing kit.
Clothes dryer tumbler front glide bearing kit component with cork strip, blue support bracket, and two metal rivets.
Infographic showing components of 306508 dryer front glide bearing kit including blue glides, cork pads, and rivets.
Woman holding a green towel in front of a dryer, promoting BlueStars DIY repair for Whirlpool and Maytag dryers.
Lifetime Warranty

306508 Dryer Tumbler Front Glide Bearing Kit for Whirlpool Maytag Dryers - Replaces 306508VP 312941 3-6508 - 2 Pack

Save 13%
0.00
$14.96
$17.20
$14.96
In stock
Fast delivery

Secure and trusted checkout with

  • Visa
  • Mastercard
  • American Express
  • PayPal
  • Diners Club
  • Discover
Contact for wholesale
🛠️
CONFIRM THE FIT FOR YOUR MODEL
Enter your model number

306508 Clothes Dryer Tumbler Front

Key Features

  • Supports the front of the dryer drum for smooth rotation.
  • Kit includes one drum glide, one felt pad, and two rivets.
  • Reduces friction between the drum and the front bulkhead.
  • Note: Two kits are typically required for a complete front glide replacement.

Replaces / Cross-Reference Part Numbers

  • 306508
  • PS1804752

Compatibility & Fitment

Fits specific dryer models from brands including:

  • Amana
  • Crosley
  • Jenn-Air
  • Kenmore
  • Maytag
  • Modern Maid
  • Whirlpool

Always verify fitment with your dryer's model number before ordering.

When to Replace

  • Dryer produces a scraping, squealing, or thumping noise.
  • Drum will not tumble or rotates with difficulty.
  • Dark streaks or marks are left on clothes after a cycle.

Installation Tips

  • Disconnect the dryer from its power source before beginning the repair.
  • This component is located on the front bulkhead where the drum rests.
  • The original rivets must be drilled out for removal; a rivet tool is required for new installation.
  • Recommended tools: Phillips screwdriver, 5/16-inch nut driver, drill with 1/8-inch bit, and a rivet tool.
  • For even wear and balanced support, it is recommended to replace both front glides at the same time.
Manufacturer
‎BlueStars
Part Number
‎306508 306508VP AP4037304 PS1804752
Item Weight
‎0.634 ounces
Product Dimensions
‎7 x 0.2 x 4.5 inches
Is Discontinued By Manufacturer
‎No
Color
‎As Pictured
Included Components
‎2 blue plastic glides, 2 brown cork pads, and 4 metallic rivets
Batteries Included?
‎No
Batteries Required?
‎No

FAQ

If you hear a loud screeching, grinding, or thumping noise coming from the front of your dryer while it is running, the glide bearings are likely worn down. Over time, these glides lose their thickness, causing the metal drum to rub directly against the front bulkhead, which can damage the drum and increase friction.
This kit replaces OEM part numbers 306508, 306508VP, 312941, and 3-6508. It is also compatible with reference numbers AP4037304 and PS1804752.
This kit is designed for use with Whirlpool, Maytag, Admiral, Amana, Jenn-Air, Magic Chef, and Norge dryers that utilize the 306508 style glide system.
Installation is a moderate repair that typically takes about 45 to 90 minutes. You will need a screwdriver, a putty knife to release the top panel clips, and a socket set to remove the front bulkhead. It is recommended to vacuum out the interior of the dryer while you have it disassembled to remove built-up lint.
Yes, while the dryer is disassembled, inspect the drum felt seal and the rear drum rollers. If the drum felt is worn or missing, the dryer will lose heat efficiency. If the rear rollers are stiff or noisy, it is best to replace them at the same time to avoid having to open the unit again in the near future.