Honda Brand 54510-VG4-C01 Clutch Cable - For Honda Walk-Behind Lawn Mowers HRR216K2 HRR216K3 HRR216K4 HRT216K1
54510-VG4-C01 replacement clutch cable for Honda walk-behind lawn mowers with metal end fitting and tension spring.
Diagram showing 57.5-inch total length and 47-inch conduit length for BlueStars replacement engine control cable.
Infographic showing sturdy construction features of a replacement cable with extension spring, eyelet end, and PVC sheath.
54510-VG4-C01 clutch drive cable for Honda walk-behind lawn mower with spring attachment.
BlueStars 54510-VG4-C01 replacement part compatibility chart for Honda lawn mower models.
Replacement lawn mower control cable for 54510-VG4-C01, black wire with spring and metal end fittings.
Lawn mower drive control cable with spring and connector for smooth self-propel operation.
Replacement drive control cable for Craftsman lawn mower with installation safety instructions.
54510-VG4-C01 replacement clutch cable for Honda walk-behind lawn mowers with metal end fitting and tension spring.
Diagram showing 57.5-inch total length and 47-inch conduit length for BlueStars replacement engine control cable.
Infographic showing sturdy construction features of a replacement cable with extension spring, eyelet end, and PVC sheath.
54510-VG4-C01 clutch drive cable for Honda walk-behind lawn mower with spring attachment.
BlueStars 54510-VG4-C01 replacement part compatibility chart for Honda lawn mower models.
Replacement lawn mower control cable for 54510-VG4-C01, black wire with spring and metal end fittings.
Lawn mower drive control cable with spring and connector for smooth self-propel operation.
Replacement drive control cable for Craftsman lawn mower with installation safety instructions.
Lifetime Warranty

54510-VG4-C01 Clutch Cable - For Honda Walk-Behind Lawn Mowers HRR216K2 HRR216K3 HRR216K4 HRT216K1

Save 19%
0.00
$12.00
$14.81
$12.00
In stock
Fast delivery

Secure and trusted checkout with

  • Visa
  • Mastercard
  • American Express
  • PayPal
  • Diners Club
  • Discover
Contact for wholesale
🛠️
CONFIRM THE FIT FOR YOUR MODEL
Enter your model number

54510-VG4-C01 Clutch Cable

Key Features

  • Controls the engagement of the transmission drive system.
  • Constructed to match original equipment specifications for tension and durability.
  • Total cable length: 58 inches.
  • Conduit length: 53 inches.
  • Designed for consistent pull and responsive mower operation.

Replaces / Cross-Reference Part Numbers

  • Honda: 54510-VG4-C01
  • Stens: 290-982

Compatibility & Fitment

  • Honda HRR216K2
  • Honda HRR216K3
  • Honda HRR216K4
  • Honda HRT216K1
  • Honda HRT215K2
  • Honda HRZ216

When to Replace

  • The self-propelled drive system fails to engage or disengage when the handle is depressed.
  • The cable shows signs of fraying, corrosion, or snapping.
  • The inner wire is stretched beyond the adjustment capacity of the cable tensioner.
  • Excessive resistance is felt when operating the drive control lever.

Installation Tips

  • Disconnect the spark plug wire before beginning installation to prevent accidental engine startup.
  • Note the routing of the existing cable before removal to ensure the new cable follows the same path, avoiding contact with hot engine components or moving parts.
  • After installation, test the drive engagement with the engine off to ensure the cable is properly seated and moving freely.
  • Adjust the cable tension at the handle or transmission attachment point according to the specific service manual for your model to ensure proper traction.

FAQ

This cable is designed for Honda walk-behind mowers, including the HRR216K2, HRR216K3, HRR216K4, HRB216, and HRT216K1 series.
This part replaces OEM number 54510-VG4-C01 and is a direct replacement for the earlier 54510-VG4-C00 version.
You likely need a new cable if your mower fails to self-propel when the drive lever is engaged, if the drive lever feels loose or has no tension, or if the cable housing is frayed or kinked. If the transmission engages intermittently or slips while mowing, the cable has likely stretched beyond the point of adjustment.
Installation is a straightforward repair that typically takes 15–30 minutes. You will generally need a pair of needle-nose pliers to remove the cotter pin at the transmission end and a 10mm wrench or socket to loosen the cable bracket on the handlebar. It is helpful to take a photo of the cable routing before removing the old one to ensure the new cable follows the exact same path.
Yes. Once installed, you will need to use the adjustment nut located on the handlebar cable housing to set the proper tension. The drive should engage firmly when the lever is pulled, but the mower should not creep forward when the lever is released. If the mower creeps, back off the adjustment nut slightly.
The primary cause of failure is normal wear and tear from constant tension and friction within the housing. Over time, the inner steel wire stretches, and the outer housing can collect debris or moisture, leading to internal corrosion that causes the cable to bind or snap.