Hotpoint Brand WH16X10158 & WH16X10159 Washer Suspension Rod Set 28.5" - For GE, Hotpoint Washer - 4 Pack
Set of four 28.5-inch washer suspension rods with red and blue housings for GE and Hotpoint washing machines.
Dimensional diagram of WH16X10158 and WH16X10159 washer suspension rods showing 28.5-inch length and component measurements.
Infographic showing anti-corrosion coating, reinforced connections, and polymer parts for GE washer suspension rod set.
GE washer suspension rod set WH16X10158 and WH16X10159 shown with a woman loading a washing machine.
Close-up of high-tension suspension rod spring for GE washer replacement parts.
Infographic showing GE washer suspension rod symptoms including vibration, unbalanced loads, noise, and shaking.
Four-step installation guide for GE washer suspension rod set WH16X10158 and WH16X10159.
Compatibility chart for WH16X10158 and WH16X10159 washer suspension rod set listing GE and Hotpoint models.
Set of four 28.5-inch washer suspension rods with red and blue housings for GE and Hotpoint washing machines.
Dimensional diagram of WH16X10158 and WH16X10159 washer suspension rods showing 28.5-inch length and component measurements.
Infographic showing anti-corrosion coating, reinforced connections, and polymer parts for GE washer suspension rod set.
GE washer suspension rod set WH16X10158 and WH16X10159 shown with a woman loading a washing machine.
Close-up of high-tension suspension rod spring for GE washer replacement parts.
Infographic showing GE washer suspension rod symptoms including vibration, unbalanced loads, noise, and shaking.
Four-step installation guide for GE washer suspension rod set WH16X10158 and WH16X10159.
Compatibility chart for WH16X10158 and WH16X10159 washer suspension rod set listing GE and Hotpoint models.

WH16X10158 & WH16X10159 Washer Suspension Rod Set 28.5" - For GE, Hotpoint Washer - 4 Pack

0.00
$73.52
Save 13% $84.55
$73.52
Out of stock
Fast Delivery Delivery options available at checkout
30 Day Returns Return Policy

Secure and trusted checkout with

  • Mastercard
  • Visa
  • American Express
  • Discover
  • JCB
  • Diners Club
CONFIRM THIS PART FITS
Enter appliance or equipment model number to verify compatibility with this part

WH16X10158 Front & WH16X10159 Rear Washer Suspension Rod Set

Key Features

  • Complete set includes four suspension rods.
  • Dampens washer tub movement to reduce vibration and noise during spin cycles.
  • Restores stability to the washer drum for balanced operation.
  • Constructed with durable metal rods, springs, and plastic mounting cups.

Replaces / Cross-Reference Part Numbers

  • WH16X10158 — Front Suspension Rod (Blue): AP5632455, PS3654190, EAP3654190, 2754602, PD00025791
  • WH16X10159 — Rear Suspension Rod (Red): AP5632406, PS3654191, EAP3654191, 2754603, PD00025792

Compatibility & Fitment

Designed for specific General Electric (GE) top-load washing machine models. To ensure compatibility, verify your appliance's model number or original part number against the cross-reference list before purchasing.

When to Replace

  • Washer tub is off-balance or sags to one side.
  • Excessive shaking, vibration, or loud banging sounds during the spin cycle.
  • Frequent "unbalanced load" (uL) or similar error codes that stop the cycle.
  • Visible damage, wear, or fluid leaks from the existing suspension rods.

Installation Tips

  • Disconnect the washing machine from power and water supplies before beginning service.
  • Access the rods by lifting the top panel of the washer.
  • For best results and even wear, replace all four suspension rods at the same time.
  • Pay attention to the orientation and location of each rod during removal to ensure correct installation of the new parts.
  • Refer to your washing machine's service manual for model-specific instructions.
WH16X10158 & WH16X10159 Washer Suspension Rod Set 28.5" - For GE, Hotpoint Washer - 4 Pack 1
WH16X10158 & WH16X10159 Washer Suspension Rod Set 28.5" - For GE, Hotpoint Washer - 4 Pack 2
WH16X10158 & WH16X10159 Washer Suspension Rod Set 28.5" - For GE, Hotpoint Washer - 4 Pack 3
4 SIMPLE STEPS

4 SIMPLE STEPS

1. Remove washer panels to access suspension mounting points | 2. Remove old suspension rods from the top frame and bottom tub connections | 3. Install new rods by securing to frame mounts and tub brackets | 4. Reassemble panels and test with an empty spin cycle for proper operation.
2X STRONGER SPRING TENSION

2X STRONGER SPRING TENSION

Premium high-elasticity springs provide twice the support of standard kits, reducing vibration and extending washer life.
#1 SOURCE OF HIGH-QUALITY REPLACEMENT PARTS

#1 SOURCE OF HIGH-QUALITY REPLACEMENT PARTS

Enjoy the comfort that our small yet mighty parts bring to your home

Compatible Models

Locate the model number of your appliance or equipment on the manufacturer's label and use it to check compatibility before ordering

Loading compatible models…

FAQs

This set is used on select GE and Hotpoint top-load washers that use suspension rods WH16X10158 and WH16X10159. Models shown in cross-reference listings include GTWN4250D0WS, GTWN4250D1WS, GTWN4250D2WS, GTWN2800D1WW, GTWN2800D2WW, GLWN2800D1WS, GCWP1800D1WW, GTW180SSJ0WW, HSWP1000M3WW, HSWP1000M4WW, HSWP1400F2WW, HTWP1200D0WW, and HTWP1400F1WW. Because GE and Hotpoint used several similar suspension systems, it is best to match the full model number and the rod part numbers before ordering.
This rod set cross-references to WH16X10158 and WH16X10159. Additional replacement numbers found in listings include PS3654190, PS3654191, AP5632455, AP5632406, 2754602, 2754603, EAP3654190, and EAP3654191.
Common symptoms include the tub sitting unevenly, the basket leaning to one side, excessive vibration during spin, loud banging against the cabinet, frequent out-of-balance loads, or the washer 'walking' across the floor. On these top-load GE and Hotpoint designs, weak rods or worn rod springs can let the tub move too much, especially with medium to heavy loads.
Yes. This is a 4-piece suspension rod set for a full suspension refresh. Listings for this part family indicate the set includes two WH16X10158 rods and two WH16X10159 rods. Replacing all four together is recommended so the tub stays evenly supported.
Installation is usually a moderate repair for a DIYer. On most GE/Hotpoint top-load washers, you will need to disconnect power, access the top panel, support the tub, and transfer the rods one at a time. Basic tools are typically a putty knife or flat screwdriver to release the top, plus standard screwdrivers or nut drivers depending on the model. Plan on about 30 to 60 minutes for most installations.
Before installation, make sure the washer is level on the floor and the leveling legs are adjusted correctly. Also inspect the tub dampening points, spring seats, rod supports, and cabinet top openings for wear or damage. If the machine still goes out of balance after rod replacement, check for an overloaded drum, an uneven floor, or worn tub components.
These rods usually wear from repeated high-speed spin cycles, chronic off-balance loads, overloading, or years of vibration that weakens the springs and support points. Once the rods lose tension or the rod ends wear, the tub can no longer stay centered during wash and spin.