3392519 Dryer Thermal Fuse - For Whirlpool Kenmore Dryers - 4 Pack
Pack of four 3392519 dryer thermal fuses for Whirlpool and Kenmore dryers with branded retail packaging.
Four-step installation guide for 3392519 dryer thermal fuse on Whirlpool and Kenmore dryers.
Comparison graphic showing the durable construction of a 3392519 dryer thermal fuse versus a standard replacement part.
Single 3392519 dryer thermal fuse replacement part with metal terminals shown on an informational product graphic.
Dimensional diagram showing the size and measurements of the 3392519 dryer thermal fuse.
3392519 dryer thermal fuse replacement part with compatibility list and dryer illustration.
Close-up of 3392519 dryer thermal fuse showing flame-resistant metal terminals and wear-resistant ABS plastic housing.
Pack of four 3392519 dryer thermal fuses for Whirlpool and Kenmore dryers with branded retail packaging.
Four-step installation guide for 3392519 dryer thermal fuse on Whirlpool and Kenmore dryers.
Comparison graphic showing the durable construction of a 3392519 dryer thermal fuse versus a standard replacement part.
Single 3392519 dryer thermal fuse replacement part with metal terminals shown on an informational product graphic.
Dimensional diagram showing the size and measurements of the 3392519 dryer thermal fuse.
3392519 dryer thermal fuse replacement part with compatibility list and dryer illustration.
Close-up of 3392519 dryer thermal fuse showing flame-resistant metal terminals and wear-resistant ABS plastic housing.
Lifetime Warranty

3392519 Dryer Thermal Fuse - For Whirlpool Kenmore Dryers - 4 Pack

Save 13%
0.00
$14.01
$16.11
$14.01
In stock
Fast delivery

Secure and trusted checkout with

  • Visa
  • Mastercard
  • American Express
  • PayPal
  • Diners Club
  • Discover
Contact for wholesale
đŸ› ïž
CONFIRM THE FIT FOR YOUR MODEL
Enter your model number

3392519 Dryer Thermal Fuse

Key Features

  • Non-resettable safety component.
  • Rated for 196°F (91°C).
  • Features two 3/16-inch male terminals.
  • Prevents overheating by interrupting power to the heating element or motor circuit.

Replaces / Cross-Reference Part Numbers

  • 3392519
  • WP3392519
  • WP3392519VP
  • 3388651
  • 694511
  • 80005
  • AP6008325
  • PS11741460
  • EAP11741460
  • ET401

Compatibility & Fitment

  • Designed for use in various electric and gas clothes dryers.
  • Compatible with models from brands including Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Crosley, and Estate.

When to Replace

  • Dryer will not start.
  • Dryer tumbles but does not produce heat.
  • The existing fuse fails a continuity test with a multimeter.

Installation Tips

  • Disconnect the dryer from its power supply before servicing.
  • A blown fuse is often a symptom of restricted airflow. Thoroughly inspect and clean the dryer's venting from the lint trap to the exterior vent cap before installing a new fuse.
  • Confirm the old fuse is faulty by testing for continuity. A reading of infinity or OL (Open Line) indicates a blown fuse.
  • Typically located on the blower wheel housing or the heating element housing.
Product image 1
Product image 2
Product image 1
Product image 2
Product image 1
Product image 2
  • WIDE COMPATIBILITY

    WIDE COMPATIBILITY

    Our Thermal Fuse fits Whirlpool, Kenmore, Maytag Washers and more
  • NON-CRACKING DESIGN

    NON-CRACKING DESIGN

    This Thermal Fuse is made of sturdy ABS platsic which is strong and wear-resistant, enhancing durability
  • BEST SOLUTION

    BEST SOLUTION

    BlueStars brings DIY solutions to help you deal with any trouble
  • SIMPLE INSTALLATION

    SIMPLE INSTALLATION

    Just 5 minutes of replacing to make your Dryer run like new!
4 SIMPLE STEPS

4 SIMPLE STEPS

1. Locate the thermal fuse behind the dryer back panel; 2. Remove the wires going to the two thermal fuse terminals; 3. Unscrew the mounting screw to remove the old thermal fuse; 4. Make sure to clean the dryer vent and blower housing. Reinstall with our new part!
WIDE COMPATIBILITY

WIDE COMPATIBILITY

Compatible with many top-name brands: Whirlpool, Kenmore, KitchenAid, Roper, Estate, Inglis, Maytag, Crosley, Amana, Admiral, Magic Chef
Rated Temperature
‎196°F (91°C)
Reset Type
‎Non-resettable (one-time / single-blow fuse)
Terminals
‎2 x 3/16" spade terminals
Material
‎Metal / Plastic
Color
‎White / Black / Brass
Overall Dimensions
‎3/4" L x 9/16" W x 2" H
Mounting
‎Attaches to blower wheel housing

FAQ

This fuse is compatible with a wide range of dryers manufactured by Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Estate, Inglis, and Amana. It is designed to fit most standard electric dryers under these brands that utilize the 3392519 part specification.
This thermal fuse replaces OEM part numbers 3392519, WP3392519VP, 3388651, 694511, 80005, AP6008325, ET401, G4AP0500, and 275040.
The most common symptom is a dryer that runs but fails to heat, or a dryer that will not start at all. If your dryer suddenly stops mid-cycle and refuses to turn back on, the thermal fuse has likely blown as a safety precaution to prevent overheating.
The most frequent cause is restricted airflow. Check your dryer vent hose, exterior vent hood, and the lint trap for blockages. If air cannot escape the dryer, heat builds up rapidly and triggers the fuse to break the circuit. Always clear your venting system before installing a new fuse to prevent the replacement from blowing immediately.
Installation is generally straightforward and typically takes 15 to 30 minutes. You will need a 1/4-inch nut driver to remove the dryer's back or front panel, depending on your specific model. Ensure the dryer is unplugged before beginning. Once the panel is removed, the fuse is located on the blower housing; simply disconnect the two wire leads, unscrew the single mounting screw, and swap in the new fuse.