30Amp Thermal Circuit Breaker 125/250V AC 32V DC - 5 Pack

0.00 Regular price
$11.76
Regular price Save 11% $13.17 Sale price
$11.76
Out of stock
Fast Delivery Delivery options available at checkout
30 Day Returns Return Policy

Secure and trusted checkout with

  • Mastercard
  • Visa
  • American Express
  • Discover
  • JCB
  • Diners Club

CONFIRM THIS PART FITS
Enter appliance or equipment model number to verify compatibility with this part

30Amp Thermal Circuit Breaker 125/250V AC 32V DC

Key Features

  • Current Rating: 30A
  • Voltage Rating: 125/250V AC, 32V DC
  • Interrupt Capacity: 1,000A
  • Reset Mechanism: Manual push-to-reset
  • Pole Configuration: Single Pole
  • Protection Type: Thermal Overload
  • Termination: Standard quick-connect terminals

Replaces / Cross-Reference Part Numbers

  • Functions as a direct replacement for breakers with matching electrical ratings and physical dimensions.
  • Commonly cross-referenced with T Tocas L1 and T3 series breakers.

Compatibility & Fitment

  • Suitable for a wide range of applications including marine, automotive, RV, industrial controls, and power strips.
  • Designed to fit standard panel mounting holes for this breaker style.
  • Includes a waterproof cap for use in environments exposed to moisture or dust.

When to Replace

  • Breaker fails to trip during an overcurrent condition.
  • Nuisance tripping occurs under normal load conditions.
  • The reset button will not stay engaged after tripping and cooling.
  • Visible signs of damage, such as a cracked casing, corrosion, or melted terminals.

Installation Tips

  • Disconnect all power to the circuit before beginning installation.
  • Verify that the replacement breaker's amperage and voltage ratings match the circuit's requirements.
  • Ensure wire connections are secure to prevent arcing or overheating.
  • Use the correct wire gauge for a 30A circuit according to local electrical codes.
  • 30Amp Thermal Circuit Breaker 125/250V AC 32V DC - 5 Pack 1

    Manual Reset

    You can conveniently push the Reset Button back in to connect the circuit again
  • 30Amp Thermal Circuit Breaker 125/250V AC 32V DC - 5 Pack 2

    Fixing symptoms

    Fix the following symptoms: frequent circuit breaker tripping, burning smell, buzzing sounds, hot to the touch, flickering power, etc
  • 30Amp Thermal Circuit Breaker 125/250V AC 32V DC - 5 Pack 3

    Saving solution

    Enjoy the great feeling when your appliances keep clean like new - BlueStars brings DIY solutions to help you deal with any trouble
  • 30Amp Thermal Circuit Breaker 125/250V AC 32V DC - 5 Pack 4

    Simple installation

    BlueStars Thermal Circuit Breaker allows for effortless attachment and detachment
#1 SOURCE OF HIGH-QUALITY REPLACEMENT PARTS

#1 SOURCE OF HIGH-QUALITY REPLACEMENT PARTS

Enjoy your life with our part inside

Compatible Models

Locate the model number of your appliance or equipment on the manufacturer's label and use it to check compatibility before ordering

Loading compatible models…

FAQs

A faulty circuit breaker will often fail to reset after it has tripped, or it may trip repeatedly under a normal load. If you notice the button remains loose, fails to 'click' into place, or if there is no continuity across the terminals when the breaker is in the 'on' position, it is time for a replacement.
This thermal circuit breaker is rated for 30 Amps and is compatible with both 125V and 250V AC electrical systems.
Installation typically requires a screwdriver to remove the housing panel and a pair of needle-nose pliers to disconnect and reconnect the spade terminals. Ensure the equipment is completely disconnected from the power source before beginning.
These breakers are designed to protect equipment from overcurrent conditions. Frequent tripping is often caused by a short circuit in the wiring, a failing motor drawing excessive current, or simply wear and tear on the internal bimetallic strip over many years of operation.
Before installing the new breaker, inspect the wiring connected to the old unit for signs of heat damage, melting, or corrosion. If the wires are damaged, they must be trimmed back to clean copper or replaced to prevent the new breaker from failing prematurely.